Abstract:Digital light processing has brought great improvements to ceramic material shaping, along with new challenges to the control of material structures and properties. Its layer-by-layer manufacturing pattern always results in a lamellar structure or sintering shrinkage anisotropy. This study introduces a simple strategy for revealing the spatial distribution of the ceramic powders and resin in a printed precursor, by which the formation mechanisms of the lamellar structure during the printing process can be studied. The results show that the sedimentation of the ceramic powders leads to resin enrichment between the layers. After the debinding process, the layers are indirectly connected by discrete ceramic particles, resulting in the lamellar structure. In addition, the evolution of the lamellar structure throughout the entire sintering process and its effects on the sintering shrinkage and strength of the printed ceramics are investigated. The disappearance of the large pores distributed at the layer interfaces during the sintering contributes to the extra shrinkage in the height direction. By combining the experimental data and finite element method, it is revealed that the lamellar structure shows different deformation behaviors under loadings with varying directions, leading to an apparent strength anisotropy. In addition, a design strategy is discussed for the lamellar structure, i.e., for controlling the strength anisotropy and its corresponding application. This study can be of great assistance for the design of structures and strengths in the additive manufacturing of ceramics.

Regulation of the Interface Compatibility of the 3D-Printing Interpenetration Networks Toward Reduced Structure Anisotropy and Enhanced Performances

Modular 4D Printing Via Interfacial Welding of Digital Light-Controllable Dynamic Covalent Polymer Networks

Heterogeneous Growth of 3D Printed Polymer Network for Multi‐Material Integration

Interfacial Regulation for 3D Printing based on Slice‐Based Photopolymerization

Recent Innovations in Interfacial Strategies for DLP 3D Printing Process Optimization

Design of enhanced mechanical properties by interpenetrating network of 3D printing dual-curing resins

Digital Light Processing 3D Printing of Enhanced Polymers via Interlayer Welding

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

Reconfigurable Polymer Networks for Digital Light Processing 3D Printing

Light-oriented 3D printing of liquid crystal/photocurable resins and in-situ enhancement of mechanical performance

Formation mechanism and controlling strategy of lamellar structure in 3D printed alumina ceramics by digital light processing

Topology Optimization for Digital Light Projector Additive Manufacturing Addressing the In-Situ Structural Strength Issue

Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing

An Approach to Improve the Resolution of DLP 3D Printing by Parallel Mechanism

Simulation and Process Analysis of DLP 3D Printing with High-strength Resin

High-resolution stereolithography using a static liquid constrained interface

The effect of material mixing on interfacial stiffness and strength of multi-material additive manufacturing

Process Analysis of DLP Photocuring 3D Printing with Modified High-strength Resin

3D interfacial material-locking structures to promote bonding strength of dissimilar materials

Enhancing interlaminar adhesion in multi-material 3D printing: A study of conductive PLA and TPU interfaces through fused filament fabrication

4D Printing of Shape-Changing Structures Based on IPN Epoxy Composites Formed by UV Post-Curing and Γ-Ray Radiation