Abstract:Lattice structures are bio-inspired designs made up of repeated unit cells consisting of beams, surfaces, or plates that fit together in an ordered or stochastic fashion. These unit cells are configured according to their size and shape in three dimensions. Simple lattices can be created using standard manufacturing techniques such as computer numerical control machining, welding, and casting. Additive manufacturing enables customers to make complex structures with small features at a reasonable cost. In the present work, using octagon, hexagrid, and rhombic dodecahedron lattice topologies, characterized by unit cell size from 3 × 3 × 3 to 7 × 7 × 7 mm and strut thickness from 0.5 to 1.5 mm, the structural behavior of a solid cylindrical model made of polylactic acid material under compression is analyzed. Finite element analysis (FEA) through Autodesk® Netfabb® solvers was used to assess lattice structure mechanical and structural properties. The results were validated by physical compression testing on additively manufactured samples. Cellular designs with 3 × 3 × 3 mm unit cells and 1.5 mm strut thickness displayed the lowest Von Mises stress and deformation. For different topologies, lowest results were rhombic dodecahedron (stress through FEA as 61.3108 MPa and stress through physical test as 61.05 MPa, deformation through FEA as 0.49921 mm and deformation through physical test as 0.48 mm), octagon (stress through FEA as 77.4147 MPa and stress through physical test as 76.92 MPa, deformation through FEA as 0.53316 mm and deformation through physical test as 0.51 mm), and for hexagrid (stress through FEA as 62.2911 MPa, stress through physical test as 62.15 MPa, deformation through FEA as 0.81997 mm and deformation through physical test as 0.81 mm). The percentage error between the stress through FEA and stress through physical test for octagon, hexagrid, and rhombic dodecahedron lattice topology was found out to be 0.63, 0.22, and 0.43%, respectively. Corresponding percentage deformation error between deformation through FEA and deformation through physical test was also found out to be 4.343, 2.435, and 3.848%, respectively. In addition, the impacts of volume reduction, surface area of the lattice, and relative density were explored pertaining to the structural behavior of the lattice. As a result of the examination into mechanical qualities based on these criteria, rhombic dodecahedron lattice topology with 3 × 3 × 3 mm unit cell size and strut thickness of 1.5 mm was found to be a better choice than octagon and hexagrid lattice topologies for 3D printing components that were loaded under axially compressive loads.

Architecture Design of Periodic Truss-Lattice Cells for Additive Manufacturing

Quasi-static Compressive Behaviors of Large-Size Titanium Lattice Sandwich Structure Based on Pulse Hot-Wire Arc Additive Manufacturing

Design of Self-Supporting Lattices for Additive Manufacturing

Mechanical Behaviors of SLM Additive Manufactured Octet-Truss and Truncated-Octahedron Lattice Structures with Uniform and Taper Beams

Mechanical characterization of additively-manufactured metallic lattice structures with hollow struts under static and dynamic loadings

Improving energy absorption and failure characteristic of additively manufactured lattice structures using hollow and curving techniques

Additively-manufactured 3D Truss-Lattice Materials for Enhanced Mechanical Performance and Tunable Anisotropy: Simulations & Experiments

Compressive performance and energy absorption of additively manufactured metallic hybrid lattice structures

Laser additive manufacturing of cellular structure with enhanced compressive performance inspired by Al–Si crystalline microstructure

High Mechanical Performance of Lattice Structures Fabricated by Additive Manufacturing

Crushing Behavior of Multi-Layer Metal Lattice Panel Fabricated by Selective Laser Melting

Mechanical Properties of Three-Dimensional Printed Combination-Design Truss Lattice Materials: Static and Dynamic Loading

Effective Mechanical Properties of Additive Manufactured Strut‐Lattice Structures: Experimental and Finite Element Study

Compressive Behavior and Energy Absorption of Polymeric Lattice Structures Made by Additive Manufacturing

Experimental and numerical investigation of PLA based different lattice topologies and unit cell configurations for additive manufacturing

Cell-size Graded Sandwich Enhances Additive Manufacturing Fidelity and Energy Absorption

Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges

Generative design and mechanical properties of the lattice structures for tensile and compressive loading conditions fabricated by selective laser melting

Lattice Structure Design and Optimization With Additive Manufacturing Constraints

Mechanical Properties and Failure Modes of Additively Manufactured Ti6Al4V Lattice Structures under Quasi-Static Compressive Loading