Abstract:The reaction of low-temperature oxidation of carbon monoxide is important in the context of air purification and reduction of automotive emissions. Along with the search for active catalytic systems for carbon monoxide oxidation, the development of new energy-saving methods of catalyst synthesis also seems important. Cobalt-iron, cobalt-manganese, cobalt-chromium, cobalt-copper binary and cobalt-manganese-iron, cobalt-copper-iron-containing triple oxide systems for low-temperature oxidation of carbon monoxide into carbon dioxide were synthesized by the sol-gel method with auto-combustion. The samples were analyzed by X-ray diffraction, IR spectral and derivatographic methods of analysis, their specific surface area was measured by the BET method, micro-photographs were taken on a scanning electron microscope. It was established that the resulting binary and ternary cobalt-containing oxide systems are multiphase systems containing ferrites, manganites, and oxides of cobalt, copper, manganese, and iron. The resulting catalysts are active in the low-temperature oxidation of carbon monoxide at 145-180 °C. The activation energy of the CO oxidation reaction on the analyzed oxide systems was revealed by the Arrhenius equation is placed in the range of 17-33 kJ/mol. In the systems, an intensifying effect of the influence of its components on the catalytic activity is observed in the oxide and spinel phases. The Co-Cr=2:1 system, which, along with chromite, also contains cobalt oxide, which is active at a much lower temperature – 145 °C than systems with a Co-Cr=1:1 and 1:2 ratios. A similar dependence was obtained in the Co-Fe=2:1 system, i.e. in a sample that, along with cobalt ferrite, also contains cobalt oxide. On this catalyst, 100% conversion of CO to CO2 occurs at a temperature of 200 °C, and a Co-Fe = 1:2 sample with a stoichiometric ratio of metals, in which the ferritization reaction completely occurs, as experiments have shown, is active only at temperatures above 300 °C. The intensifying effect of the influence of the components on its activity is also observed in three-component systems, in which the complete conversion of CO occurs at a temperature of 145-160 °C. The appearance of various structural defects during short-term combustion of the gel without additional heat treatment, which can potentially be considered as catalytically active centers, on the one hand, and the presence of oxide and spinel phases in the composition of catalysts, which exhibit a mutual reinforcing effect, on the other hand, is demonstrative advantage of this method for the synthesis of active catalysts for low-temperature oxidation of carbon monoxide to dioxide.

CO Oxidation Catalysts Based on the Complex Antimonates of La2O3–CoO–Sb2O5 System

Sm2O3/Co3O4 catalysts prepared by dealloying for low-temperature CO oxidation

ACTIVITY AND SO2-POISONING RESISTANCE OF La_(0.8)M_(0.2)CoO_3(M=Sr,Ce,Ba,Ca) PEROVSKITE CATALYSTS FOR VOCS CATALYTIC COMBUSTION

Promotional Effects of Sm/Ce/La Doping on Soot Oxidation over MnCo2O4 Spinel Catalysts

Synthesis of La1-xSrxCoO3-δ and its catalytic oxidation of NO and its reaction path

Synthesis Of Nanostructure Lamno3 And Lacoo3 Catalysts And Their Catalytic Activity In Oxidation Reaction

Effect of polymerization/complexation agents molar ratio on structure and catalytic activity of La0.7Ba0.3Co0.3Ni0.7O3 nanocatalyst in low-temperature CO oxidation

Promotion effects of LaCoO 3 formation on the catalytic performance of Co–La oxides for soot combustion in air

Investigation of Flame Spray Synthesized La1-xSrxCoO3 Perovskites with Promotional Catalytic Performances on CO Oxidation

Cobalt-Containing Oxide Catalysts Obtained by The Sol-Gel Method with Auto-Combustion in The Reaction of Low-Temperature Oxidation of Carbon Monoxide

Enhanced Catalytic Activity for NO Oxidation over Ba Doped LaCoO3 Catalyst

Subsolidus Phase Equilibria in the La2O3–(Ni/Со)O–Sb2O5 Systems

Active yet extremely durable Co3O4 spheroids of different texture without/with Au deposition for CO oxidation

Sm<sub>2</sub>O<sub>3</sub>/Co<sub>3</sub>O<sub>4</sub> catalysts prepared by dealloying for low-temperature CO oxidation

Activity and Stability of Co3O4-based Catalysts for Soot Oxidation: the Enhanced Effect of Bi2O3 on Activation and Transfer of Oxygen

f coal bed methane on LaCoO 3 perovskite catalyst : the structure evolution and catalytic performance

Low-temperature CO Oxidation over Co3O4-based Catalysts: Significant Promoting Effect of Bi2O3 on Co3O4 Catalyst

Linear Activation Energy-Reaction Energy Relations for LaBO3 (B = Mn, Fe, Co, Ni) Supported Single-Atom Platinum Group Metal Catalysts for CO Oxidation

B-Site modification of LaMn<sub>0.9</sub>Co<sub>0.1</sub>O<sub>3</sub>perovskite using a selective dissolution method in C<sub>3</sub>H<sub>6</sub>oxidation

Toward Environmentally Benign Catalyst Composition: Effect of Fe Substitution on Crystal Structure and Redox Behavior in Lanthanum Cobaltite Catalysts for CO Oxidation

Stability and Activity of Cobalt Antimonate for Oxygen Reduction in Strong Acid