Abstract:The study focuses on the synthesis of nanocomposites CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) using a hybrid chemical coprecipitation and sol–gel method. Validation of composite formation, incorporating distinct spinel and perovskite phases, is achieved through Fourier‐transform infrared spectroscopy. From X‐ray diffraction spectra, it can be concluded that average crystalline size calculated from Debye–Scherer and Williamson–Hall method increases on increasing the Sr substitution. Furthermore, the % crystallinity increases on increasing the Sr substitution. The scanning electron microscope analysis confirms the intricate 3D morphology observed in the composites. The electrocatalytic performance of these materials in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) is evaluated. Notably, CoFe2O4–La0.2Sr0.8 CoO3 exhibits remarkable electrocatalytic activity, achieving current densities of j = 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at E = 650 mV. This underscores its potential as a catalyst for sustainable energy conversion processes. Overall, these findings highlight the promising application of spinel‐boosted perovskite composites in enhancing the efficiency of critical electrochemical reactions. CoFe2O4–La1−xSrxCoO3 (x = 0.2, 0.6, 0.8) composites have been synthesized using a two‐step, low‐temperature wet chemical approach that combines coprecipitation and sol–gel techniques. The composite materials have been physicochemically analyzed using Fourier‐transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscope. The electrocatalytic properties of the composite materials have been assessed in terms of their performance in oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. Cyclic voltammetry has been used for analyzing the redox behavior of the materials in 1 M KOH solution. The electrocatalytic activity of the materials has been assessed using anodic polarization curves on Ni substrate and the CoFe2O4–La0.2Sr0.8CoO3 film electrode demonstrates excellent activity, with current densities of 11.1 mA cm−2 for OER and 47.4 mA cm−2 for MOR at 650 mV. Also, the CoFe2O4–La0.2Sr0.8CoO3 film electrode has the maximum specific activity of 1.1 × 103 mA cm−2 g−1 at 650 mV toward OER. The electrodes' stability has been assessed through chronoamperometric experiments and additional insight into the enhancement of electrocatalytic activity gained through the electrochemical surface area estimations using electrochemical impedance spectroscopy. From chronoamperometric experiment, it has been observed that the CoFe2O4–La0.2Sr0.8CoO3 film electrode attains stability within 114 s with a current density of 108.7 mA cm−2. Furthermore, the thermodynamic parameters, including the standard enthalpy of activation (ΔH°#), standard entropy of activation (ΔS°#), and standard electrochemical energy of activation (ΔHel°# ), have been estimated by anodic polarization curve recorded in KOH as well as KOH with CH3OH solutions at various temperatures.

Investigation of Flame Spray Synthesized La1-xSrxCoO3 Perovskites with Promotional Catalytic Performances on CO Oxidation

Facile One-Step Flame Synthesis of La1−xSrxMnO3 Nanoparticles for CO Catalytic Oxidation

Insights into the Role of Strontium in Catalytic Combustion of Toluene over La1-xSrxCoO3 Perovskite Catalysts.

Effect of Sr and Fe Doped LaCoO3 on Catalytic Oxidation of Soot and Sulfur Resistance

Synthesis of La1-xSrxCoO3-δ and its catalytic oxidation of NO and its reaction path

Deep Insight into the Mechanism of Catalytic Combustion of CO and CH 4 over SrTi 1– x B x O 3 (B = Co, Fe, Mn, Ni, and Cu) Perovskite via Flame Spray Pyrolysis

ACTIVITY AND SO2-POISONING RESISTANCE OF La_(0.8)M_(0.2)CoO_3(M=Sr,Ce,Ba,Ca) PEROVSKITE CATALYSTS FOR VOCS CATALYTIC COMBUSTION

Correlating the electronic structure of perovskite La1−Sr CoO3 with activity for the oxygen evolution reaction: The critical role of Co 3d hole state

Sodium doped SrTi1-xBxO3 (B Mn, Co) for formaldehyde catalytic oxidation: Flame spray pyrolysis fabrication and reaction mechanism elaboration

Investigation on the Catalytic Combustion of CO over LaMn 1‐ X Cu X O 3 Promoted by Acid Treatment

Characteristics of SrCo1-xFexO3-δPerovskite Powders with Improved O2/CO2Production Performance for Oxyfuel Combustion

Tailoring Spinel with Perovskite: Sr Substitution in the Perovskite Phase of CoFe2O4–LaCoO3 Nanocomposite for Oxygen Evolution and Methanol Oxidation in Alkaline Medium

Insights into the role of strontium in catalytic combustion of toluene over La 1− x Sr x CoO 3 perovskite catalysts

Investigation of LaMnO3 Catalyst Loaded on HZSM‐5 Zeolite for CO Catalytic Oxidation

Sr‐doped Double Perovskite La2CoMnO6 to Promote the Oxygen Evolution Reaction Activity

Insights into in situ surface reconstruction in cobalt perovskite oxides for enhanced catalytic activity

Preparation, Characterization and Catalytic Activities of La0.8Sr0.2Fe1-xScxO3-δ Catalysts for Methane Combustion

Activation of Surface Oxygen Sites in a Cobalt-Based Perovskite Model Catalyst for CO Oxidation

Influence of Partial Mn-substitution on Surface Oxygen Species of LaCoO3 Catalysts

Enhanced Catalytic Activity for NO Oxidation over Ba Doped LaCoO3 Catalyst

Preparation, Characterization and Catalytic Activities of La0.8Sr0.2Fe1-xScxO3-delta Catalysts for Methane Combustion