Abstract:Catalytic combustion has been widely applied to remove the trace combustible pollutants. However, the earth-abundant and high-performance nanocatalysts are still the main research focus on promoting catalytic efficiency. Herein, the Cu and Mn mixed oxides supported on TiO2 nanoparticles with various Cu and Mn molar contents synthesized via the flame spray pyrolysis (FSP) technique are utilized in the catalytic oxidation of lean CO and CH4. Initially, the Cu–Mn/TiO2 nanocatalysts are composed of spherical structures with a diameter of about 20 nm, whose specific surface area is between 60 and 90 m2/g. The Cu element is more evenly distributed on the TiO2 surface than the Mn element, owing to the distinctly different ion radii. Both the copper and manganese cations could incorporate into the TiO2 lattice, which generates oxygen vacancies and enhances the diffusion of oxygen ions, causing the transformation of the antanse to rutile phase. When the molar content of the Cu–Mn increases to less than 30 mol %, the temperature of its reduction peak keeps decreasing due to the hydrogen spillover effect. Moreover, the catalytic performances of the Cu–Mn/TiO2 with 12 mol % loading (12CMT) are all optimal during the low-temperature and the high-temperature stages, which are superior to the FSP-made copper manganese or copper titanium oxides. This is attributed to the small crystal particles, highly dispersed active components of CuOx and MnOx, and the higher ratios of Cu1+/Cu and Mn4+–Oads Lewis acid–base pairs. In addition, the strong interaction between Cu–Mn components and rutile phase support can tremendously promote the activity of catalytic combustion. Under the simulated flue gas, the catalytic properties of 12CMT decreases in comparison with those of CO and CH4 mixed gas due to the introduction of CO2. Ultimately, the Cu–Mn/TiO2 samples exhibit the outstanding water resistance, thanks to the hydrophobization of the catalyst surface.This article has not yet been cited by other publications.

Deep Insight into the Mechanism of Catalytic Combustion of CO and CH 4 over SrTi 1– x B x O 3 (B = Co, Fe, Mn, Ni, and Cu) Perovskite via Flame Spray Pyrolysis

CuO Quantum Dots Supported by SrTiO 3 Perovskite Using the Flame Spray Pyrolysis Method: Enhanced Activity and Excellent Thermal Resistance for Catalytic Combustion of CO and CH 4

Sodium doped SrTi1-xBxO3 (B Mn, Co) for formaldehyde catalytic oxidation: Flame spray pyrolysis fabrication and reaction mechanism elaboration

CO Catalytic Oxidation of Pt-Loaded Perovskite BaTiO3 Near Ferroelectric-Phase Transition Temperature

Investigation of Flame Spray Synthesized La1-xSrxCoO3 Perovskites with Promotional Catalytic Performances on CO Oxidation

Self-Assembled 3d Flower-Like Perovskite Pbtio3 Nanostructures And Their Application In The Catalytic Oxidation Of Co

Insights into the Role of Strontium in Catalytic Combustion of Toluene over La1-xSrxCoO3 Perovskite Catalysts.

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Facile One-Step Flame Synthesis of La1−xSrxMnO3 Nanoparticles for CO Catalytic Oxidation

One-Step Synthesis of Nanostructured Cu–Mn/TiO 2 via Flame Spray Pyrolysis: Application to Catalytic Combustion of CO and CH 4

Improved Catalytic Activity and Stability of Ba Substituted SrTiO 3 Perovskite for Oxidative Coupling of Methane

Catalytic combustion of methane over La2BCoO6 perovskites containing Ni, Cu and Fe: impact of B-sites on oxygen species and catalytic activity

Exploring reaction mechanism of CO oxidation over SrCoO3 catalyst: A DFT study

In Situ ESR and TPSR Measurements of SrTi0.975Li0.025O3-δ Nanocatalysts for Oxidative Coupling of Methane at Low Temperature

A Study of the Catalytic Properties of SrTi1-xMg xO3-δ Perovskite-type Catalysts for Oxidative Coupling of Methane

Catalysts Based on Strontium Titanate Doped with Ni/Co/Cu for Dry Reforming of Methane

Characterization of Nanosized SrTiO3 Catalyst for Oxidative Coupling of Methane by in Situ ESR and TPSR

A Study On Catalytic Properties Of Perovskite-Type Oxide Srtio3 Catalysts For Oxidative Coupling Of Methane

Insights into in situ surface reconstruction in cobalt perovskite oxides for enhanced catalytic activity

Improvement of CO Oxidation and CH4 Combustion by Pd and Pt Partial Substitution on LaMn0.5Cu0.5O3 Perovskite

A Study Of The Catalytic Properties Of Srti1-Xmgxo3-Delta Perovskite-Type Catalysts For Oxidative Coupling Of Methane