Abstract:Microchannel membrane-based desorber plays a vital role in compact and efficient absorption refrigeration systems to utilize renewable and waste energy. However, its existing models have certain errors because they are based on the empirical correlations that developed for other processes. In this study, experiments are carried out to evaluate the heat/mass transfer and solution pressure drop characteristics of a H 2 O/LiBr microchannel membrane-based desorber (1 mm width, 250 mm length, 0.15 and 1 mm height, and 100 channel numbers) with mass concentration ranging between 50 and 60 wt% and inlet temperature between 65 and 85 °C. The desorber with a lower channel height has a higher overall heat transfer coefficient, a higher desorption rate, and a greater pressure drop. But when the inlet temperature reaches 85 °C, the higher channel yields an unexpected higher desorption rate (0.00645 kg/(m 2 ⋅s)) than the lower channel (0.00615 kg/(m 2 ·s)). The experimental results show that both heat and mass transfer processes are strengthened by a higher solution flow rate, higher inlet temperature, and lower concentration, while the solution pressure drop is significantly reduced by a lower flow rate, lower concentration, and higher inlet temperature. Based on the experimental data, empirical correlations for Nusselt number, Sherwood number, and friction factor are obtained with errors of ± 40%, ± 20%, and ± 25% with prediction accuracies improvement of 38.83%, 62.76% and 78.18% compared to the correlations from the literature, facilitating the evaluation and design of compact and efficient absorption refrigeration systems.

Effect of structure and operation parameters on heat and mass transfer coefficients of single‐bubble absorption for lithium bromide solution

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

STUDY ON LITHULM-BROMIDE AQUEOUS SOLIYTION AIR-PRECOOLED ADIABATIC ABSORPTION PROCESS

A Review of Pool-Boiling Processes Based on Bubble-Dynamics Parameters

Experimental investigation of two-phase flow characteristics of LiBr/H 2O solution through orifice plates in vacuum environment

A mathematical model with experiments of single effect absorption heat pump using LiBr–H2O

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Experimental Study on an Thermosyphon Loop with Bubble Pump Effect

Coupling Model of Motion and Mass Transfer in Multicomponent Desorption of Fine Bubbles

Experimental and numerical investigations of motion and mass transfer of single bubbles in a turbulent flow chamber

Experimental parameter study and correlation development of microchannel membrane-based absorption process for efficient thermal cooling with high compactness

Mass transfer dynamics of single CO 2 bubbles rising in monoethanolamine solutions: Experimental study and mathematical model

Experimental and LBM Simulation Study on the Effect of Bubbles Merging on Flow Boiling

Experimental evaluation on heat/mass transfer and pressure drop of a microchannel membrane‐based desorber for compact and efficient H 2 O/LiBr absorption refrigeration

Numerical simulation on the header-orifice structure-based liquid-vapor separator used in liquid-separation condenser

Research progress of absorption characteristics enhancement of LiBr/NH_3-H_2O with additives and nano-particles

Dynamic Modeling and Operation Characteristics Analysis of LiBr Absorption Heat Pump

Numerical Simulations of the Effect of Liquid Viscosity on Gas-Liquid Mass Transfer of a Bubble Column with a CFD-PBM Coupled Model

Experimental study and correlation on the falling column adiabatic absorption of water vapor into LiBr–H 2 O solution

Effect of Liquid Viscosity on Hydrodynamics and Bubble Behaviour of an External‐loop Airlift Reactor

Revealing the effect of water on the CO 2 -ionic liquid system in microchannels: Physical properties, hydrodynamics and mass transfer behavior