Dynamic characteristics of refrigerant evaporation temperature in air-water heat source heat pump
Xin Tan,Jibo Long,Jinhua Li,Zhongwen Li,Hanyu Jiang,Hang Liu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.123128
IF: 6.4
2024-04-09
Applied Thermal Engineering
Abstract:In order to improve the problem of reduced heat capacity and unstable heating ability of air source heat pump (ASHP) in the heating mode during the cold season, a heat pump evaporator using air and surface water as a heat source is designed in this paper. A heat transfer unit's calculation model of an air–water heat source evaporator is established. Experimental tests and simulation studies are conducted on the refrigerant evaporation temperature and heat pump heating performance. On this basis, a refrigerant evaporation temperature prediction model is constructed using a multiple linear regression (MLR) model. The trend of refrigerant evaporation temperature under air–water heat source is analyzed by taking the winter meteorological parameters in Xiangtan City as an example. The results show that the air–water heat source heat pump (A-WSHP) has a higher refrigerant evaporation temperature and a smaller temperature fluctuation range than the ASHP. The average values of refrigerant evaporation temperatures under the experimental conditions were 5.3 °C and 4.6 °C, respectively. The temperature fluctuation ranges were 3.8 °C-6.7 °C and 2.8 °C-7.0 °C, respectively. The A-WSHP has higher heating capacity and heating stability. Air temperature, air velocity, water spray temperature and water spray flow rate are all important parameters that affect the refrigerant evaporation temperature of a heat pump. Evaporation temperature changes are positively correlated with these factors. In the refrigerant evaporation temperature prediction model, the air temperature change has the most significant effect on the evaporation temperature, followed by spray water temperature, air velocity, and spray flow rate, whose influence weights are 82.5 %, 38.8 %, 29.4 %, and 25.3 %, respectively. Selecting different temperatures of spray water and adjusting the evaporator's inlet spray flow rate can improve the refrigerant evaporation temperature and heat pump heating stability.
energy & fuels,engineering, mechanical,thermodynamics,mechanics