Abstract:The loop thermosyphon is an efficient two-phase heat transfer device for heat recovery and energy saving. Generally, the Lee model is commonly applied in the Computational Fluid Dynamics (CFD) methods to predict the simultaneous evaporation and condensation in the loop thermosyphon. However, the Lee model has the non-conservation of mass problem due to the mismatch between the condensation mass transfer time relaxation parameter ( r c ) and the evaporation mass transfer time relaxation parameter ( r e ) in the two-phase closed system. This paper improves the Lee model with dynamic- r c by considering the mass balance in the loop thermosyphon. The value of the r c is related to the total mass of the liquid working fluid, the evaporation intensity, and the condensation intensity. The CFD simulated temperature distributions were in good agreement with the experimental temperature data. This study investigates the effect of different r c and saturation temperatures ( T sat ) on the simulation results. The results show that the refined model ensures the total working fluid mass remains stable during the calculation process, and the simulation of the gas-liquid two-phase distribution in the loop thermosyphon is more accurate. The value of the T sat will have a more significant effect on the wall temperature distribution of the loop thermosyphon but less on the working fluid distribution. Additionally, the impact of filling ratios is investigated while setting the T sat as constant in the CFD models. The results experimentally and numerically indicate that when the filling ratio is 50 %, the overall thermal resistance is the smallest, and the liquid working fluid distribution is optimal. This work provides a method and approach for analyzing the heat transfer procedure inside the loop thermosyphon and improving the accuracy of the numerical model.

Numerical simulation on the header-orifice structure-based liquid-vapor separator used in liquid-separation condenser

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Explorations of multi‐pass‐orifice header in the liquid‐separation condenser by using CFD simulation

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Numerical Analysis of Heat Transfer Characteristics of a Falling Film Type Plate-Fin Condenser/Reboiler

Numerical simulation analysis of a heat transfer tube in SuperORV

Numerical study of R134a liquid-vapor flow in a vertical header for phase separation with low inlet quality

Numerical Simulation on Structure Optimization of Liquid-Gas Cylindrical Cyclone Separator

Simulation research on the flow field performance of the supersonic separator for natural gas

An experimentally validated model for microchannel condensers with separation circuitry

Numerical simulation of the effects of the internal components on the uniformity of the flow field in a tubular separator

Numerical Simulation of Multi-Tubular Bundle Tube Cyclone Separator

Effect of Geometric Parameters of Liquid-Gas Separator Units on Phase Separation Performance

Inundation Correlation Research on the Simulation of Two-Phase Flow and Heat Transfer in a Condenser

Separation mechanism and influential factor study on vane-type-associated petroleum gas separator

Numerical simulation of single bubble condensation in subcooled flow using OpenFOAM

Numerical Simulation on the Performance of Axial Vane Type Gas-Liquid Separator with Different Guide Vane Structure

Numerical investigation of the thermal performance of a loop thermosyphon considering dynamic condensation mass transfer time relaxation parameter

Numerical Investigation on Performance of Moisture Separator: Experimental Validation, Applications and New Findings

Numerical simulation of structural optimization within a supersonic cyclone separator