Abstract:This study was conducted to address water pollution concerns entwined with electroless nickel plating (ENP) industry. Its principal endeavor centers on the development and application of an innovative single-compartment technique to proficiently treat spent ENP baths. The research demonstrated the recovery of Nickel (Ni) from wastewater through synergistic interactions between electrocatalytic oxidation and electrodeposition processes. Electrochemical tests used a direct current power supply in constant current mode, with the positive pole on IrO 2 /Ti mesh and negative pole on stainless steel. Zero-valent nickel recovered on the electrodes was conclusively identified via SEM, XRD, and EDS analyses. This work carefully examined the impact of initial pH, initial Ni ion concentration, and current density (CD) on electrochemical recovery efficiency. The findings suggest that higher current densities positively influence the Ni recovery ratio. Additionally, through meticulous experiments, the viability of this approach for treating spent ENP baths has been confirmed. An impressive 98.88% recovery of Ni was achieved under specific conditions: CD 4.5 mA cm −2 , experimental time 180 min, pH 4.5, electrodes spacing 1.5 cm, temperature 55 °C, and a dilution factor 10 times. The study demonstrated the process for Ni recovering from ENP wastewater through direct oxidation and subsequent decomposition, leading to liberation of free Ni ions. The recovered substance, identified as zero-valent nickel, adheres to the electrodes. The method employed in this research is described by its cost-effectiveness, user-friendliness, and low energy consumption. As a result, this study makes valuable contributions to both wastewater remediation and the sustainable utilization of Ni resources.

A novel green synergistic extraction formulation based on D2EHPA for recovering nickel from nickel plating effluent

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Multifold Enhanced Synergistic Removal of Nickel and Phosphate by a (N,fe)-Dual-functional Bio-Sorbent: Mechanism and Application.

Highly efficient nickel recovery from industrial wastewater via synergistic electrodeposition and electrocatalytic oxidation technique

Recovery of Ni(II) from Real Electroplating Wastewater Using Fixed-Bed Resin Adsorption and Subsequent Electrodeposition

Selective recovery of Nickel from electroplating rinse bath wastewater by an integrated Donnan Dialysis/precipitation process

High-efficiency Nickel Recovery from Spent Electroless Nickel Plating Solution: Effective Degradation of High-concentration Nickel Complexes to Form Nickel Ferrite Nanomaterial via Fe 3 O 4 Catalytic Oxidation

Decomplexation of Ni(II)-citrate and recovery of nickel from chelated nickel containing electroplating wastewater by peroxymonosulfate with nickel

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Highly Selective Removal of Ni(II) from Plating Rinsing Wastewaters Containing [Ni-Xnh3-yp2o7]n Complexes Using N-chelating Resins.

Solvent Extraction of Nickel and Zinc from Nitric Acid Solution Using D2EHPA: Experimental and Modeling

Industrial-scale highly efficient nickel recovery from electroplating wastewater using resin adsorption followed by aeration mixing acid regeneration

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Simultaneous recovery of phosphorus with nickel purification in nickel-plating wastewater via Fe/C activated H2O2 oxidation

Separation of valuable metals from mixed cathode materials of spent lithium-ion batteries by single-stage extraction

Nickel Speciation of Spent Electroless Nickel Plating Effluent along the Typical Sequential Treatment Scheme.

Electrocatalysis coupled super-stable mineralization for the efficient treatment of phosphorus containing plating wastewater

Synergistic extraction of cobalt (II) and nickel (II) with a mixture of D2EHPA and 1-octanol

Molecular Identification Guided Process Design for Advanced Treatment of Electroless Nickel Plating Effluent.

Electrochemical Ni-EDTA degradation and Ni removal from electroless plating wastewaters using an innovative Ni-doped PbO2 anode: Optimization and mechanism

Validation of a Combined Fe(III)/UV/NaOH Process for Efficient Removal of Carboxyl Complexed Ni from Synthetic and Authentic Effluents.