Abstract:Ethylenediaminetetraacetic acid (EDTA) is widely employed as a chelating agent in the electroless nickel plating industry to form stable metal–organic complexes (e.g., Ni-EDTA). These metal–organic complexes cannot be removed from plating wastewaters by traditional treatments in a cost-effective way. While electrochemical advanced oxidation processes (EAOPs) have been utilized for the efficient degradation of Ni-EDTA at the anode, challenges remain in the simultaneous and effective recovery of nickel at the cathode. In this study, we investigate the efficacy of five cathode materials [i.e., carbon felt (CF), titanium plate, graphite plate (GP), copper plate, and stainless-steel plate] with respect to Ni recovery. The highest Ni removal efficiency of 81.6 ± 0.1% was achieved with the carbon felt cathode which was 30% higher than that of the titanium cathode (52.1 ± 1.4%) with the improvement in performance attributed to the higher rate of mass transport of Ni ions (CF: 4.3 ± 0.4 × 10–4 s–1 vs Ti: 1.8 ± 0.2 × 10–4 s–1) toward the nanowire structure of carbon felt and to the large surface area of the carbon felt cathode compared with the other cathodes. While the chemical composition of the deposits was independent of the cathodic material or structure, the morphology of deposition varied with the cathode material. The accumulated Ni on the carbon felt surface was successfully recovered either as a nickel salt solution by acid leaching or as high purity NiO by calcinating the Ni-loaded carbon felt cathode at over 800 °C. The performance of the regenerated carbon felt after acid leaching was comparable to that of the fresh cathode even after 10 cycles of use and regeneration via acid leaching with this result confirming the stability and reusability of the carbon felt material.

Decomplexation of Ni(II)-citrate and recovery of nickel from chelated nickel containing electroplating wastewater by peroxymonosulfate with nickel

A Comparative Study Of Nickel(Ii) Removal From Electroplating Wastewater By Pre-Precipitation Combined With Fenton-Precipitation Or Fenton-Like-Precipitation

Decomplexation removal of Ni(II)-citrate complexes through heterogeneous Fenton-like process using novel CuO-CeO2-CoOx composite nanocatalyst.

Treatment of Electroplating Wastewater Containing Nickel by Fenton Oxidation-Ferrite Process

Simultaneous recovery of phosphorus with nickel purification in nickel-plating wastewater via Fe/C activated H2O2 oxidation

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Electrochemical Ni-EDTA degradation and Ni removal from electroless plating wastewaters using an innovative Ni-doped PbO2 anode: Optimization and mechanism

Biological upcycling of nickel and sulfate as electrocatalyst from electroplating wastewater

Electrocatalysis coupled super-stable mineralization for the efficient treatment of phosphorus containing plating wastewater

High-efficiency Nickel Recovery from Spent Electroless Nickel Plating Solution: Effective Degradation of High-concentration Nickel Complexes to Form Nickel Ferrite Nanomaterial via Fe 3 O 4 Catalytic Oxidation

Removal of Low-Concentration Nickel in Electroplating Wastewater Via Incomplete Decomplexation by Ozonation and Subsequent Resin Adsorption

Molecular Identification Guided Process Design for Advanced Treatment of Electroless Nickel Plating Effluent.

Recovery of Phosphorus and Metallic Nickel along with HCl Production from Electroless Nickel Plating Effluents: the Key Role of Three-Compartment Photoelectrocatalytic Cell System.

Highly efficient nickel recovery from industrial wastewater via synergistic electrodeposition and electrocatalytic oxidation technique

Copper sulphide/cuprous sulphide doped zero-valent iron@carbon (ZVI@C/CuS/Cu2S) activate PMS for rapid and effective decomposition of Ni-EDTA

Validation of a Combined Fe(III)/UV/NaOH Process for Efficient Removal of Carboxyl Complexed Ni from Synthetic and Authentic Effluents.

Approaches to Enhancing Cathodic Nickel Recovery from Ni-EDTA Containing Synthetic Wastewaters

Removal of low concentrations of nickel ions in electroplating wastewater by combination of electrodialysis and electrodeposition

Efficient and Rapid Removal of Nickel Ions from Electroplating Wastewater Using Micro-/Nanostructured Biogenic Manganese Oxide Composite

Highly Selective Removal of Ni(II) from Plating Rinsing Wastewaters Containing [Ni-Xnh3-yp2o7]n Complexes Using N-chelating Resins.

Efficient Treatment of an Electroplating Wastewater Containing Heavy Metal Ions, Cyanide, and Organics by H2o2 Oxidation Followed by the Anodic Fenton Process