Abstract:After the extraction of molybdenum from the spent HDS catalyst, a residue containing aluminum, nickel, cobalt, and a small amount of molybdenum was obtained. The simultaneous recovery of nickel, cobalt, aluminum, and residual molybdenum from molybdenum leach residue can be achieved through hydrochloric acid leaching. In the work presented herein, the extraction of molybdenum, cobalt, and nickel from the acidic leach solution of molybdenum leach residue was investigated. Trioctyl tertiary amine can selectively extract cobalt and molybdenum from the acidic leach solution, the extraction of both cobalt and molybdenum reached more than 99% after two-stage countercurrent extraction. The combination of pure water and 25% ammonia water can be utilised for the separation and extraction of cobalt and molybdenum from the loaded cobalt-molybdenum organic phase. After the extraction of cobalt and molybdenum, a synergistic extraction system comprising decyl 4-picolinate and dinonylnaphthalene sulfonic acid can be employed for nickel extraction, achieving a nickel extraction exceeding 99.70% while maintaining aluminum extraction at only 0.32% after undergoing four-stage countercurrent extraction. The nickel stripping efficiency can reach 99.50% after four-stage countercurrent stripping, using a stripping agent of 2 mol/L H 2 SO 4 . Après l'extraction du molybdène du catalyseur HDS usé, on a obtenu un résidu contenant de l'aluminium, du nickel, du cobalt et une petite quantité de molybdène. On peut obtenir la récupération simultanée du nickel, du cobalt, de l'aluminium et du molybdène résiduel à partir des résidus d'attaque du molybdène grâce a une lixiviation à l'acide chlorhydrique. Dans le travail présenté ici, on a examiné l'extraction du molybdène, du cobalt et du nickel de la solution d'attaque acide des résidus d'attaque du molybdène. L'amine de trioctyle tertiaire peut extraire sélectivement le cobalt et le molybdène de la solution d'attaque acide, l'extraction du cobalt et du molybdène atteignant plus de 99% après une extraction à contre-courant en deux étapes. On peut utiliser la combinaison d'eau pure et de 25% d'eau ammoniaquée pour la séparation et l'extraction du cobalt et du molybdène de la phase organique chargée de cobalt-molybdène. Après l'extraction du cobalt et du molybdène, on peut utiliser un système d'extraction synergique comprenant du picolinate-4 décyle et de l'acide sulfonique dinonylnaphthalène pour l'extraction de nickel, obtenant une extraction du nickel dépassant 99.70% tout en maintenant l'extraction de l'aluminium à seulement 0.32% après avoir subi une extraction à contre-courant en quatre étapes. L'efficacité de l'élimination du nickel peut atteindre 99.50% après l'élimination à contre-courant en quatre étapes, en utilisant un agent d'élimination de 2 mol/L H 2 SO 4 .

Synergistic extraction of cobalt (II) and nickel (II) with a mixture of D2EHPA and 1-octanol

Extraction Chemistry of Palladium I. Study on the Mechanism of Synergistic Extraction of Palladium (ii) with 1-Phenyl-3-methyl-4-dichloroacetopyrazolone-5-one and Diphenyl Sulfoxide

Methyl-isobutyl ketone and 1-octanol as synergistic agents and phase modifiers in solvent extraction of cobalt(II) by the N-(2-hydroxybenzylidene)aniline from sulfate medium

Extraction Chemistry of Palladium(II). Mechanism of Antagonistic Synergistic Extraction of Palladium By A 4-Aroyl Derivative of 1-phenyl-3-Methyl-Pyrazolone-5- one and Trialkylamine of High Molecular Weight

Association Behavior of 4-Acylpyrazolone Derivative and Tertiary Amine of High Molecular Weight in Antagonistic Synergistic Extraction of Palladium

Removal of Impurities from Nickel and Cobalt in Mixed Hydroxide Precipitate with Solvent Extraction Using Di(2-Ethylhexyl) Phosphoric Acid

Synergic Extraction of Lanthanide Ions by Bis-(1′-Phenyl-3′-methyl-5′-Pyrazol One-4′-yl)ethanedione and Phenanthroline

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

A novel green synergistic extraction formulation based on D2EHPA for recovering nickel from nickel plating effluent

Solvent Extraction of Nickel and Zinc from Nitric Acid Solution Using D2EHPA: Experimental and Modeling

Cobalt separation from nickel in sulfate aqueous solution by a new extractant: Di-decylphosphinic acid (DDPA)

Aliphatic Non-Chelating Aldoximes as the Effective Extractants for Recovery and Separation of Nickel and Cobalt from Halide and Thiocyanate Solutions

Solvent extraction of Ni and Co from Ni-laterite leach solutions using a new synergistic system consisting of Versatic 10 acid, Mextral 6103H and Aliquat 336 with elemental mass balance for leaching, precipitation, solvent extraction, scrubbing and stripping

Synergistic extraction behavior of p-aminobenzoic acid by di-2-ethylhexylphosphoric acid and tri-n-butylphosphate

THERMODYNAMICS OF SOLVENT EXTRACTION OF METALS (VII) EHEHPA-CoSO4-CuSO4 System

Extraction of molybdenum, cobalt, and nickel from acidic leach solution of molybdenum leach residue of spent hydrodesulfurization catalyst

A Microextraction Approach for Rapid Extraction and Separation of Mn(II) and Co(II) Using Saponified D2EHPA System

Relevance of Surface Adsorption and Aqueous Complexation for the Separation of Co(II), Ni(II), and Fe(III).

Ultrasound/Complexing Agent-Assisted Solvent Extraction Behavior of Zn2+ with D2EHPA from Sulfuric Media Containing Transition and Rare-Earth (Fe, Ni, Cd, La, and Ce) Metal Ions

Study on Cu(II) extraction process optimization and mechanism from acidic leaching solution using the deep eutectic solvent P507/Menthol

A study of scatchard-hildebrand solution theory for metal solvent extraction systems