Abstract:After the extraction of molybdenum from the spent HDS catalyst, a residue containing aluminum, nickel, cobalt, and a small amount of molybdenum was obtained. The simultaneous recovery of nickel, cobalt, aluminum, and residual molybdenum from molybdenum leach residue can be achieved through hydrochloric acid leaching. In the work presented herein, the extraction of molybdenum, cobalt, and nickel from the acidic leach solution of molybdenum leach residue was investigated. Trioctyl tertiary amine can selectively extract cobalt and molybdenum from the acidic leach solution, the extraction of both cobalt and molybdenum reached more than 99% after two-stage countercurrent extraction. The combination of pure water and 25% ammonia water can be utilised for the separation and extraction of cobalt and molybdenum from the loaded cobalt-molybdenum organic phase. After the extraction of cobalt and molybdenum, a synergistic extraction system comprising decyl 4-picolinate and dinonylnaphthalene sulfonic acid can be employed for nickel extraction, achieving a nickel extraction exceeding 99.70% while maintaining aluminum extraction at only 0.32% after undergoing four-stage countercurrent extraction. The nickel stripping efficiency can reach 99.50% after four-stage countercurrent stripping, using a stripping agent of 2 mol/L H 2 SO 4 . Après l'extraction du molybdène du catalyseur HDS usé, on a obtenu un résidu contenant de l'aluminium, du nickel, du cobalt et une petite quantité de molybdène. On peut obtenir la récupération simultanée du nickel, du cobalt, de l'aluminium et du molybdène résiduel à partir des résidus d'attaque du molybdène grâce a une lixiviation à l'acide chlorhydrique. Dans le travail présenté ici, on a examiné l'extraction du molybdène, du cobalt et du nickel de la solution d'attaque acide des résidus d'attaque du molybdène. L'amine de trioctyle tertiaire peut extraire sélectivement le cobalt et le molybdène de la solution d'attaque acide, l'extraction du cobalt et du molybdène atteignant plus de 99% après une extraction à contre-courant en deux étapes. On peut utiliser la combinaison d'eau pure et de 25% d'eau ammoniaquée pour la séparation et l'extraction du cobalt et du molybdène de la phase organique chargée de cobalt-molybdène. Après l'extraction du cobalt et du molybdène, on peut utiliser un système d'extraction synergique comprenant du picolinate-4 décyle et de l'acide sulfonique dinonylnaphthalène pour l'extraction de nickel, obtenant une extraction du nickel dépassant 99.70% tout en maintenant l'extraction de l'aluminium à seulement 0.32% après avoir subi une extraction à contre-courant en quatre étapes. L'efficacité de l'élimination du nickel peut atteindre 99.50% après l'élimination à contre-courant en quatre étapes, en utilisant un agent d'élimination de 2 mol/L H 2 SO 4 .

Methyl-isobutyl ketone and 1-octanol as synergistic agents and phase modifiers in solvent extraction of cobalt(II) by the N-(2-hydroxybenzylidene)aniline from sulfate medium

Synergistic extraction of cobalt (II) and nickel (II) with a mixture of D2EHPA and 1-octanol

Separation of cobalt and nickel via solvent extraction with Cyanex-272: Batch experiments and comparison of mixer-settlers and an agitated column as contactors for continuous counter-current extraction

Study on Extraction of Cobalt(ii) by Sodium Laurate/pentan-1-ol/heptane/nacl Microemulsion System

Synergistic extraction of some divalent cations into nitrobenzene by using dicarbollylcobaltate and substituted calix[5]arenes

High-efficient Synergistic Extraction of Co(II) and Mn(II) from Wastewater Via Novel Microemulsion and Annular Centrifugal Extractor

Solvent extraction of Ni and Co from Ni-laterite leach solutions using a new synergistic system consisting of Versatic 10 acid, Mextral 6103H and Aliquat 336 with elemental mass balance for leaching, precipitation, solvent extraction, scrubbing and stripping

Aliphatic Non-Chelating Aldoximes as the Effective Extractants for Recovery and Separation of Nickel and Cobalt from Halide and Thiocyanate Solutions

Hydrodynamic features of pulsed solvent extractor for separation of two metals by using the antagonistic effect of solvents

Extraction of molybdenum, cobalt, and nickel from acidic leach solution of molybdenum leach residue of spent hydrodesulfurization catalyst

Solvent extraction-based recovery of Co from leach solutions of Cu Co ores using a Mextral 6103H-naphthenic acid- isooctanol system

A case study using spectroscopy and computational modelling for Co speciation in a deep eutectic solvent

Removal of Co(II) and various metal ions from the residue of the zinc plant through solvent extraction using both acid and neutral extractants

Weak Interaction Induced Selective Separation of V/Mo/Co from Spent Hydrodesulfurization Catalyst Leaching Solution: Mechanism and Strategy

Synergistic effect of organic acid on the dissolution of mixed nickel-cobalt hydroxide precipitate in sulphuric acid solution

Extraction/transportation of Co2+ metal ions with bis(2-ethylhexyl) phosphate dissolved in kerosene using a multidropped liquid membrane technique

Extraction Equilibria of Lithium with Tributyl Phosphate in Three Diluents

Removal of Impurities from Nickel and Cobalt in Mixed Hydroxide Precipitate with Solvent Extraction Using Di(2-Ethylhexyl) Phosphoric Acid

Cobalt Single‐Atom‐Intercalated Molybdenum Disulfide for Sulfide Oxidation with Exceptional Chemoselectivity

THERMODYNAMICS OF SOLVENT EXTRACTION OF METALS(V) EHEHPA-CoSO4 System

Solvent Extraction and Separation of Cobalt from Leachate of Spent Lithium-Ion Battery Cathodes with N263 in Nitrite Media