Abstract:The need for safe storage systems with a high energy density has increased the interest in high-voltage solid-state Li-metal batteries (LMBs). Solid-state electrolytes, as a key material for LMBs, must be stable against both high-voltage cathodes and Li anodes. However, the weak interfacial contact between the electrolytes and electrodes poses challenges in the practical applications of LMBs. In this study, a double-layered solid composite electrolyte (DLSCE) was synthesized by introducing an antioxidative poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP)-10 wt % Li1.3Al0.3Ti1.7(PO4)3 (LATP) to the cathode interface, whereas a lithium-friendly poly(oxyethylene) (PEO)-5 wt % LATP was made to come into contact with Li metal. Owing to the heterogeneous double-layered structure of the DLSCE, a high ionic transfer number (0.43), high ionic conductivity (1.49 × 10–4 S/cm), and a wide redox window (4.82 V) were obtained at ambient temperature. Moreover, the DLSCE showed excellent Li-metal stability, thereby enabling the Li–Li symmetric cells to stably run for over 600 h at 0.2 mA/cm2 with effective lithium dendrite inhibition. When paired with a high-voltage LiNi1/3Co1/3Mn1/3O2 cathode, the Li/DLSCE/NCM111 cell exhibited excellent electrochemical performance: long-term cyclability with 85% capacity retention could be conducted at 0.2C after 100 cycles corresponding to 100% Coulombic efficiencies.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c22532?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c22532</a>.EIS and FTIR spectra; SEM image and size distribution of pristine; the TG plot and DSC profiles; LSV curves and the schematic of the intermolecular-hydrogen-binding effect between PVDF-HFP and PEO membranes; voltage profiles of Li symmetrical cells; the lithium-metal surface before battery cycle and the cross-sectional images of the NCM111/DLSCE/Li cell after cycling; cycling performance of the NCM111/PVDF-HFP-10 wt % LATP/Li battery; and EIS of NCM111/Li cells before and after cycling (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c22532/suppl_file/am0c22532_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dense integration of solvent-free electrodes for Li-ion supercabattery with boosted low temperature performance

High-performance lithium metal batteries with ultraconformal interfacial contacts of quasi-solid electrolyte to electrodes

High‐Performance, Low‐Cost, and Dense‐Structure Electrodes with High Mass Loading for Lithium‐Ion Batteries

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

Boosting the Temperature Adaptability of Lithium Metal Batteries via a Moisture/Acid‐Purified, Ion‐Diffusion Accelerated Separator

Ultrasmooth and Dense Lithium Deposition Toward High-Performance Lithium-Metal Batteries

In Situ Constructing Robust Interface by Deep Eutectic Polymeric Electrolyte Enables High Performance Lithium Metal Batteries with High‐Loading Cathode

Homogeneous Li + Flux Distribution Enables Highly Stable and Temperature‐Tolerant Lithium Anode

Super‐Ionic Conductor Soft Filler Promotes Li+ Transport in Integrated Cathode‐Electrolyte for Solid‐State Battery at Room Temperature

Improving dual electrodes compatibility through tailoring solvation structures enabling high-performance and low-temperature Li||LiFePO 4 batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

Synergistic Effect of Lithium Salts with Fillers and Solvents in Composite Electrolytes for Superior Room-Temperature Solid-State Lithium Batteries

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Electrolyte Engineering Empowers Li||CFx Batteries to Achieve High Energy Density and Low Self-Discharge at Harsh Conditions

Chemo-mechanical stable cathode interphase via interface in-situ catalytic-conversion integrated design for all solid-state batteries

Synergy of strong/weak interface adhesion forces and Li2S additive enabling high performance full anode-free lithium-metal batteries

Solvent-Free Lithium-Ion Batteries to High Volumetric Capacity via Carbon Nanotube-Coated Ni-Rich Cathodes

Cathode-electrolyte integrating strategy enabling solid-state lithium metal battery with enhanced cycle stability

High-areal-capacity thick cathode with vertically-aligned micro-channels for advanced lithium ion batteries

Superwettable High-Voltage LiCoO 2 for Low-Temperature Lithium Ion Batteries