Abstract:Lithium-ion micro-batteries (LIMBs) with higher energy density have drawn extensive attention. 3D printing technique based on direct ink writing (DIW) is a low-cost and simple approach to fabricate LIMBs especially with higher areal capacity. Herein, poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) nanofibrils are first combined with carbon methyl cellulose (CMC) to achieve the 3D printing of thick LFP (LiFePO4)-PEDOT-CMC electrodes at room temperature by DIW. 3D-printed PEDOT-CMC-based composite thick electrodes demonstrate high conductivity because of the interconnected 3D network including hierarchical macro-micro porous criss-crossing filaments which can provide effective transport paths for Li ions and electrons. Further, LFP-PEDOT-CMC electrodes of different thicknesses are 3D-printed to study the effect of thicknesses on the electrochemical performances. The 3D-printed ultra-thick LFP-CMC-PEDOT electrode of 1.43 mm thickness at lower rate exhibits a highly improved areal capacity (5.63 mAh cm−2, 0.2 C) and high capacity retention (after 100 cycles, 0.2 C, 92%). The rate capability decreases steadily with the increasing thickness. However, for the extra-thick electrodes greater than 1.43 mm thickness, the discharge capacity, rate, and cycle capability decline dramatically. Electrochemical impedance spectroscopy measurements are used to explain the kinetic mechanism. For 3D-printed LFP-CMC-PEDOT electrodes blow 1.43 mm thickness, the 3D network plays the dominant role to maintain the effective transmission dynamics regardless of electrode thickness. But for the extra-thick electrodes, the greater transport distance becomes the major limiting factor resulting in the degradation of electrochemical performances. This work will offer guidance on how to apply 3D-printed ultra-thick electrodes with high energy density to LIMBs.

High-areal-capacity thick cathode with vertically-aligned micro-channels for advanced lithium ion batteries

High‐Performance, Low‐Cost, and Dense‐Structure Electrodes with High Mass Loading for Lithium‐Ion Batteries

Hierarchical Electrode Architecture Enabling Ultrahigh-Capacity LiFePO 4 Cathodes with Low Tortuosity

(Digital Presentation) Ultra-Thick Electrodes Utilizing Short Diffusion Path Via Novel Micro-Casting Process for Lithium-Ion Batteries

Sandwich, Vertical-Channeled Thick Electrodes With High Rate And Cycle Performance

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Boosted Storage Kinetics in Thick Hierarchical Micro–Nano Carbon Architectures for High Areal Capacity Li‐Ion Batteries

Sub‐Thick Electrodes with Enhanced Transport Kinetics via In Situ Epitaxial Heterogeneous Interfaces for High Areal‐Capacity Lithium Ion Batteries

Introducing low-tortuosity channels in thick electrode for high-areal-capacity solid polymer battery

3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries

Free-standing ultrathick LiMn2O4@single-wall carbon nanotubes electrode with high areal capacity

Highly Aligned Ultra‐Thick Gel‐Based Cathodes Unlocking Ultra‐High Energy Density Batteries

Design and preparation of thick electrodes for lithium-ion batteries

Enhanced cycling performance of cylindrical lithium-ion battery with high areal capacity electrodes via non-uniform load

Thick Electrode with Thickness-Independent Capacity Enabled by Assembled Two-Dimensional Porous Nanosheets

High areal capacity battery electrodes enabled by segregated nanotube networks

Directional LiFePO4 cathode structure by freeze tape casting to improve lithium ion diffusion kinetics

Simultaneously Homogenized Electric Field and Ionic Flux for Reversible Ultrahigh-Areal-Capacity Li Deposition

Tunable Porous Electrode Architectures for Enhanced Li-Ion Storage Kinetics in Thick Electrodes.

Stable Lithium Electrodeposition at Ultra‐High Current Densities Enabled by 3D PMF/Li Composite Anode

A strategy to build high-performance thick electrodes for lithium-ion batteries with enhanced compressive modulus and regulated tortuosity in the phase-inversion process