Abstract:A complementary electrolyte system with 0.8 M lithium bis(fluorosulfonylimide) (LiFSI) salt and 2 wt % lithium perchlorate (LiClO4) additive in fluoroethylene carbonate (FEC)/ethyl methyl carbonate (EMC) solution enables not only stable cycling of lithium metal batteries (LMBs) with practical loading (<30 μm lithium anode, cathode loading > 4 mAh/cm2) but also outstanding degradation stability toward the end of cycle life when compared to the conventional electrolyte. Although the use of LiFSI salt can increase the electrolyte conductivity and lengthen the cycle life of LMBs, the aged lithium anode morphology formed by the sacrificial decomposition of LiFSI is highly porous, leading to an abrupt cell capacity drop toward the end of cycling. Moreover, the inability to stop aluminum corrosion by the LiFSI-based electrolyte also causes cracking of the cathode tab during prolonged cycling. It is observed that a highly porous aged lithium consumed electrolyte at a higher rate, leading to the dry-out of electrolyte solvents. On the contrary, dense aged lithium anode morphology increased the localized current applied on the lithium, causing the formation of lithium dendrite. Thus, porosity control is the key to enhance battery performance. In this complementary system, LiClO4 was introduced as an advanced additive to not only improve the capacity retention rate but also mitigate the abrupt capacity drop toward the end of cycle life because LiClO4 acted as a pore astringent reducing the porosity of the aged lithium metal anode to the desired level. Moreover, the addition of LiClO4 can also suppress the Al corrosion, allowing stable high-voltage cycling of LMBs. The synergistic effect of combining LiFSI salt and a LiClO4 additive leads to an electrolyte system that can facilitate the application of high-energy LMBs with practical electrode loading.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03017?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03017</a>.Brief statement in a nonsentence format listing the contents of the material; chemical structures and acronyms of carbonates, fluorinated carbonates, and lithium salts; pristine NMC622 cathode; backside (Al current collector) of the harvested electrode aged in the LiFSI/FEC/EMC electrolyte; Capacity retention and electrochemical impedance spectra of Li/NMC622 cells with different electrolytes; XPS spectra of C 1s, F 1s, S 2p, and Cl 2p for the pristine and harvested lithium anodes after formation under different electrolytes; Tafel plots obtained from the CV test in the Li/Cu cell with various FEC/EMC electrolytes; and SEM image of the Al working electrode before and after potentiostatic hold under different electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03017/suppl_file/am1c03017_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Electrolyte Engineering Empowers Li||CFx Batteries to Achieve High Energy Density and Low Self-Discharge at Harsh Conditions

Pushing the Theoretical Limit of Li-CF(x) Batteries: a Tale of Bifunctional Electrolyte.

Weakly-solvating electrolytes enable ultralow-temperature (−80 °C) and high-power CFx/Li primary batteries

Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries

Ultra‐Low Temperature Li/CFx Batteries Enabled by Fast‐transport and Anion‐pairing Liquefied Gas Electrolytes

Electrolyte Strategy Enables High‐Rate Lithium Carbon Fluoride (Li/CFx) Primary Batteries in All‐Climate Environments

The High-Fluorinated Bi-Molecular Combination Enables High-Energy Lithium Batteries under Challenging Environment

Novel Pseudo-Crown Ether-Like Lithium Salt Enabling Fast Charging/discharging High-Energy Lithium Metal Batteries

Enable Rechargeable Carbon Fluoride Batteries with Unprecedented High Rate and Long Life by Oxygen Doping and Electrolyte Formulation

Anion Donicity of Liquid Electrolytes for Lithium Carbon Fluoride Batteries

Boosting High-Voltage Practical Lithium Metal Batteries with Tailored Additives

Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries

All-Temperature, High-Energy-Density Li/CF x Batteries Enabled by a Fluorinated Ether as a Cosolvent

Designing an Asymmetric Ether-Like Lithium Salt to Enable Fast-Cycling High-Energy Lithium Metal Batteries

High-voltage Li metal batteries enabled by a nonflammable amphiphilic electrolyte

Fluorinated Solvent Molecule Tuning Enables Fast‐Charging and Low‐Temperature Lithium‐Ion Batteries

Complementary Electrolyte Design for Li Metal Batteries in Electric Vehicle Applications

An all-climate CFx/Li battery with mechanism-guided electrolyte

Enhanced low-temperature resistance of lithium-ion batteries based on methyl propionate-fluorinated ethylene carbonate electrolyte

BF 3 -based Electrolyte Additives Promote Electrochemical Reactions to Boost the Energy Density of Li/CF x Primary Batteries

Self-purifying electrolyte enables high energy Li ion batteries