Abstract:To achieve net-zero carbon emissions in a building's lifecycle, a comprehensive approach is required, addressing both embodied and operational carbon footprints. To support this goal, this study assesses the environmental, hygrothermal, and mechanical characteristics of different carbon-free adobe bricks bio-sourced with straw and evaluates their impacts on improving the energy performance of a one-story case study building located in a semi-arid climate. At the material scale, the mechanical performance, hydrothermal behavior, and durability of carbon-free straw-reinforced adobes, with weight percentages of 0, 1, 2, 3, and 4%, at different sizes: long straw (100–200 mm) and crushed straw (5–25 mm) were studied. The results show that incorporating straw into bricks increases porosity, enabling the production of lightweight bricks that comply with Moroccan standards for lightweight structures, possessing a density lower than the accepted limit of 1750 kg/m3. Furthermore, the thermomechanical properties of reinforced adobes were considerably improved compared to non-reinforced ones, with a gain in mechanical compressive and flexural strengths of 31.2% and 184%, respectively. However, it is important to note that in the case of adobe bricks reinforced with long straw (BLS), the findings revealed that, unlike other thermomechanical properties, long straw has a negative effect on compressive strength. Additionally, thermal conductivity decreased by 93.8% and 86.8% for a 4% inclusion of long and crushed straw, respectively. At the building scale, the indoor hygrothermal comfort was evaluated with respect the hot, semi-arid region in southern Morocco. The results show that the reinforced adobe material is able to reduce the indoor temperature of the case study building from 3 °C to 12 °C during the summer time, compared to the outdoor temperature, with a time lag of up to 5 h between the interior and exterior. Moreover, it successfully maintained diurnal indoor air temperature fluctuation within 2 °C. In addition, indoor relative humidity remained in the recommended 40%–65% by ASHRAE Standard 62.1–2022, over 78% during the monitoring period, even when the outside relative humidity fluctuated significantly (5–95%). Finally, a Morris-based sensitivity analysis was carried out on nine design parameters of the case-study building to assess the impact of varying the thermal properties of reinforced adobe bricks on cooling and heating energy performance, respectively. Thermal conductivity was found to have a significant impact on cooling energy demands and a lesser influence on heating demands. The study also indicates that straw-reinforced adobe bricks can improve cooling energy performance by up to 17.8% without compromising the overall embodied carbon of the building envelope.

Experimental study of relative humidity absorbed through capillarity of building material under isothermal conditions: Clay-Kaolin reinforced with Alfa fibers

Investigating Temperature Effects on the Shear Behavior of Clays: Molecular Dynamics Simulations

Mechanical Properties of Alfa, Sisal, and Hybrid Alfa/Sisal Fiber Satin Cloth Reinforced Epoxy

Impact of the loading of date palm fibers on the performances of mortars

Physicochemical and thermomechanical performances study for Timahdite sheep wool fibers application in the building's insulation

Thermophysical and Mechanical Assessment of Unfired Clay Bricks with Dry Grass Fibrous Filler

Drying Kinetics and Sorption Isotherms of Biocomposite Materials: Experimental Investigation and Modeling Analysis

Effect of straw fibers addition on hygrothermal and mechanical properties of carbon-free adobe bricks: From material to building scale in a semi-arid climate

Ambient Pressure Drying as an Advanced Approach to the Synthesis of Silica Aerogel Composite for Building Thermal Insulation

Characterization and Suitability Assessment of Ameskroud Clay Deposits for Ceramic Applications

Thermo-mechanical characterization of a bio-composite mortar reinforced with date palm fiber

Alfa fiber-polyurethane composite as a thermal and acoustic insulation material for building applications

Moisture buffer, fire resistance and insulation potential of novel bio-clay plaster

Moroccan heated clay-based geopolymer reinforced with date palm cellulose: Microstructure characterization and mechanical/physical properties

Experimental Study of Thermal Conductivity of Concrete with Biosourced Material for Saved Energy in Buildings

Experimental investigation on chemical and thermomechanical properties of concrete incorporating Washingtonia Robusta fibers

Exploration of a New Source of Sustainable Aluminosilicate Clay Minerals from Morocco: Mineralogical and Physico-Chemical Characterizations for Clear Upcoming Applications

Study of the permeability of tubular mineral membranes: application to wastewater treatment

Physicochemical and Mechanical Characterization of Ceramic Materials from Meknes Region (Morocco)

A model for anomalous moisture diffusion through a polymer-clay nanocomposite

Development of a new lightweight gypsum composite: Effect of mixed treatment of barley straws with hot water and bio-based phase change material on the thermo-mechanical properties