Study of the Effect of Hemp Fibers and Brick Waste Powder on the Mechanical Characteristics of Mortar: Experimental and Statistical Analysis
Yazid Chetbani Messaouda Boumaaza Rebih Zaitri Ahmed Belaadi Aissa Ben Mahammed Aissa Laouissi Ibrahim M.H. Alshaikh Djamel Ghernaout a Department of civil Engineering,Faculty of Science and Technology,Djelfa University,Djelfa,Algeriab Laboratory of Civil Engineering and Hydraulics (LGCH),University 8 May 1945 Guelma,Guelma,Algeriac Department of Mechanical Engineering,Faculty of Technology,University 20 Août 1955-Skikda,El-Hadaiek Skikda,Algeriad Department of Civil Engineering,Faculty of Science and Technology,Laghouat University,Laghouat,Algeriae Department of Mechanical Engineering,Faculty of Sciences and Technology,University of Mohamed El Bachir El Ibrahimi,Bordj Bou Arreridj,Algeriaf Department of Civil Engineering,University of Science and Technology,Faculty of Engineering,Sana'a,Yemeng Chemical Engineering Department,College of Engineering,University of Ha'il,Ha'il,Saudi Arabiah Chemical Engineering Department,Faculty of Engineering,University of Blida,Blida,Algeria
DOI: https://doi.org/10.1080/15440478.2024.2438900
2024-12-13
Journal of Natural Fibers
Abstract:This study aims to optimize the mechanical and rheological properties of cementitious mortar by incorporating hemp fibers (HF) and brick waste powder (BWP), with the goal of developing a more sustainable and eco-friendly construction material. Using response surface methodology (RSM), different proportions of HF (0, 0.25, 0.5%) and BWP (0, 10, 20%) were tested to optimize flowability, compressive and flexural strength. The experimental results indicate that the optimal composition, 0.25% HF and 10% BWP, significantly enhances mechanical performance while maintaining workability. Furthermore, the outcomes show that adding 10% BWP and around 0.5% HF considerably reduced the rheological characteristics, as seen by a longer flow time in comparison to other combinations. The ideal cement substitution rates, as determined by RSM, were 11.46% of BWP and 0.31% of HF. The study demonstrates the feasibility of using natural fibers and recycled materials in eco-friendly mortars, offering a sustainable alternative for construction. The predictive accuracy of the RSM model was validated through experimental verification, with results deviating by less than 5%. These findings contribute to the advancement of green building materials and sustainable construction practices. 本研究旨在通过掺入大麻纤维(HF)和砖废料粉(BWP)来优化水泥砂浆的力学和流变性能,以开发一种更可持续、更环保的建筑材料. 使用响应面法(RSM),测试了不同比例的HF(0,0.25,0.5%)和BWP(0,10,20%),以优化流动性、抗压和抗弯强度. 实验结果表明,最佳成分0.25%的HF和10%的BWP在保持可加工性的同时显著提高了机械性能. 此外,结果表明,添加10%的BWP和约0.5%的HF显著降低了流变特性,与其他组合相比,流动时间更长. 通过RSM确定的理想水泥替代率为BWP的11.46%和HF的0.31%. 该研究证明了在环保砂浆中使用天然纤维和再生材料的可行性,为建筑提供了一种可持续的替代方案. 通过实验验证,RSM模型的预测精度得到了验证,结果偏差小于5%. 这些发现有助于推动绿色建筑材料和可持续建筑实践的发展.
materials science, textiles