Abstract:Clays have been exploited in the manufacture of diverse products from ceramics to paints, pharmaceuticals, plastics, cosmetics, and more. Thus, they can be used in many industrial applications, showing good adsorbent ability thanks to their lamellar structure, high cation exchange capacity, pore size distribution, and large surface area. For this reason, considerable attention has been paid to their in-depth characterization, for further integration in sectors such as biomedicine, construction, remediation, aerospace, and nanotechnology. For this aim, two samples of natural clays, ALO1 and PRE4, from the southeast part of Albania, were subject to a multi-methodological characterization, with the aim of addressing the use of such geomaterials in possible sensing applications. X-ray fluorescence analysis, morphological characterization of the samples, and energy-dispersive system spectroscopy pointed to an extreme mineralogical variety, with kaolinite in AL01 and montmorillonite in PRE4 as the most abundant phases. This fact was further confirmed by powder X-ray diffraction, showing a quartz content of 20%, a kaolinite content of 64%, and a muscovite content of 16% for ALO1; meanwhile, for PRE4, we found a content of quartz of 45%, a content of montmorillonite of 34.9%, and a content of clinochlore of 20%. Infrared spectroscopy and thermal analyses confirmed the presence of hydroxyl groups in both samples, suggesting a higher content in ALO1. Measurement of N2 adsorption isotherms on the clay samples yields specific surface areas of 87 m2/g for PRE4 and 32 m2/g for ALO1, pore volumes of 0.721 cm3/g for PRE4 and 0.637 cm3/g for ALO1, and similar pore sizes in the range of 6–12 nm. Electrochemical analysis highlighted a good conductivity of ALO1 and PRE4 when used for the modification of commercial carbon-based screen-printed electrodes. In detail, higher currents were registered by differential pulse voltammetry for the electrodes modified with the clays with respect to bare electrodes, as well as good repeatability of the measurements. In addition, a comparative study with nanomaterials, known for their good conductivity, was achieved, using carbon black and gold nanoparticles as a reference, showing that the conductivity of the clays was lower than but not so different from those of the reference materials.

Characterization and Suitability Assessment of Ameskroud Clay Deposits for Ceramic Applications

Evaluation insight into Abu Zenima clay deposits as a prospective raw material source for ceramics industry: Remote Sensing and Characterization

Exploration of a New Source of Sustainable Aluminosilicate Clay Minerals from Morocco: Mineralogical and Physico-Chemical Characterizations for Clear Upcoming Applications

Main parameters influencing the plastic behavior of clays used for traditional ceramics production

Physicochemical and Mechanical Characterization of Ceramic Materials from Meknes Region (Morocco)

Akermanite-based ceramics from Moroccan dolomite and perlite: Characterization and in vitro bioactivity assessment

Investigating Temperature Effects on the Shear Behavior of Clays: Molecular Dynamics Simulations

The clayey quarry sludge from a waste to a valuable raw material for red ceramics

Genesis and assessment of clay materials suitability for earthenware production in northern Cameroon

In-Depth Characterization of Natural Clays from Southeast Albania

Characterization, technological properties and utilization of clay-rich argillite quarry waste as raw material in ceramics and other industrial applications

Assessment of Some Clay Deposits from the Gercus Formation (Middle Eocene) for Brick Manufacturing in the Dokan Area, NE Iraq

Low-cost northern Tunisian kaolinitic clay-based refractory materials and effect of a rich alumina clay addition

Experimental study of relative humidity absorbed through capillarity of building material under isothermal conditions: Clay-Kaolin reinforced with Alfa fibers

Elaboration and characterization of mullite-anorthite-albite porous ceramics prepared from Algerian kaolin

Suitability and characterization of pumice, bauxite, and ferrochrome slag as alternative raw materials in vitrified ceramic industry

Development of fireclay aluminosilicate refractory from lithomargic clay deposits

Elaboration and Characterization of Porous Materials from Moroccan Natural Resources: Application to Industrial Wastewater Treatment

Study of Carbonated Clay-Based Phosphate Geopolymer: Effect of Calcite and Calcination Temperature

Characterization and properties of Chinese red clay for use as ceramic and construction materials

Thermophysical and Mechanical Assessment of Unfired Clay Bricks with Dry Grass Fibrous Filler