A Parameter Identification Approach in Inductive Power Transfer Systems for Light Electric Vehicles

Huang Li,Xin Liu,Fei Gao,Yun Zhang,Houjun Tang

DOI: https://doi.org/10.1109/tte.2023.3294220

IF: 6.519

2023-01-01

IEEE Transactions on Transportation Electrification

Abstract:In inductive power transfer (IPT) systems, load and mutual inductance identification are important to implement system control, which are difficult to measure directly in light electric vehicles (LEVs). To pursue low cost, the LEV usually applies an uncontrolled rectifier without communication. Aiming at this scenario, this paper presents a simple and effective online load and mutual inductance identification method in IPT systems with a rectifier load. By leveraging information from the DC input voltage and inverting current, which are readily available, communication between the primary and secondary sides is eliminated. Additionally, a low-computation burden decomposition method for ac variables is employed to handle the inverting current. The proposed method can be applied to both resonant and non-resonant IPT systems without limitations imposed by compensation networks. First, the characteristic of a dual-side LCC compensated IPT system with a rectifier load is analyzed. Then, an identification method for the load and mutual inductance is proposed. Finally, a 400-W IPT prototype is developed to verify the effectiveness of the proposed method. Both simulation and experimental results show that the load and mutual inductance can be identified with high accuracy.

engineering, electrical & electronic,transportation science & technology