Abstract:A reconfigurable IPT system with high misalignment tolerance and CC‐CV output characteristics is proposed in this article. The experimental results demonstrate that the proposed reconfigurable IPT system can maintain stable CC and CV outputs within 50% lateral and vertical offset (the coupling factor varies from 0.1 to 0.21), when the load varies from 11 to 80 Ω, and the output current and voltage fluctuations remain below 5%. Misalignment between transmission coils is an inevitable challenge in inductive power transfer (IPT) systems, particularly affecting the constant current (CC) and constant voltage (CV) outputs essential for battery charging. A reconfigurable IPT system with high misalignment tolerance and CC‐CV output characteristics is proposed in this article. The main circuit of the system is composed of a LCC‐LCC and LCC‐S topology with two intermediate coils, and two switches equipped with single unidirectionally blocking MOSFETs are incorporated on the secondary side to transition from CC to CV mode. A comprehensive analysis of the output characteristics for the proposed hybrid topology in both CC and CV modes is provided. Furthermore, the parameter optimization design based on BP coil for wide misalignment tolerance is presented. The experimental results demonstrate that the proposed reconfigurable IPT system can maintain stable CC and CV outputs within 50% lateral and vertical offset (the coupling factor varies from 0.1 to 0.21), when the load varies from 11 to 80 Ω, and the output current and voltage fluctuations remain below 5%.

A Hybrid IPT System with High-Misalignment Tolerance and Inherent CC–CV Output Characteristics for EVs Charging Applications

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

An Inductive Power Transfer Charging System With a Multiband Frequency Tracking Control for Misalignment Tolerance

An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

An IPT System with Constant Current and Constant Voltage Output Features for EV Charging

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

A Dual-Source Inductive Power Transfer System Optimized with Large Misalignment Tolerance

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.

A Misalignment-Tolerant Hybrid Coupler for Electric Vehicle IPT Charging Systems.

A Heterogeneous Inductive Power Transfer System for Electric Vehicles with Spontaneous Constant Current and Constant Voltage Output Features

A Reconfigurable IPT System With CC‐CV Output Characteristics and High Misalignment Tolerance

A Gyrator-Based Converting-Splitting Method of Designing Inductive Power Transfer Systems with Constant Current and Constant Voltage Charging

A Hybrid Three-Coil IPT Topology with High Tolerance to Pad Misalignment for Battery Charging Applications

Novel IPT system for enhanced efficiency and anti-misalignment capability

IPT system with misalignment tolerance and constant voltage output based on BP coupling pad optimization design

An Integrated Mutually Compensatory Dual Receiver for AGV Misalignment-Tolerant IPT Charging

Research on a Three-Coil Hybrid IPT Charger with Improved Tolerance to Coupling Variation and Load-Independent Output

Misalignment Tolerance and Interoperability of Wireless Charging System Based on Two-Channel Topology and Coil Optimization

An Intermediate Coil for Misalignment Tolerant IPT System with Dual Decoupled Receivers