IPT system with misalignment tolerance and constant voltage output based on BP coupling pad optimization design

Zhao Wei Gong,Qian Shi,Man Zhao

DOI: https://doi.org/10.1007/s00202-024-02465-x

IF: 1.63

2024-05-19

Electrical Engineering

Abstract:Aiming at the problem of unsteady power output caused by the position misalignment of the coupler in the wireless charging process, a hybrid inductive power transfer (IPT) system with misalignment tolerance and constant voltage output based on the bipolar (BP) coupler optimization design is proposed in this paper. Firstly, the mathematical model of the hybrid topology circuit with intermediate coils is established, and the necessary conditions for the mutual inductance parameters configuration are summarized. Secondly, a pad parameter design method based on the BP coil structure is proposed to realize the maximum mutual inductance offset range. Meanwhile, the sensitivity of the compensation parameters in the proposed topology and the implementation of zero voltage switch (ZVS) are analyzed. Finally, a prototype is built to verify the theoretical analysis. The experimental results show that within 50% x -axis misalignment and −10 to 50% z -axis misalignment, the output voltage fluctuation range can be controlled within 5% when the load varies from 20 to 80 Ω, which indicates that the proposed system can achieve a well misalignment tolerance and constant voltage output. And the highest output efficiency of the system can reach 93.6%.

engineering, electrical & electronic