Abstract:In inductive power transfer systems, misalignment can lead to inconsistent output power. In this article, a topology based on a primary-side detuned multifrequency compensation circuit is proposed to provide consistent output over a wide misalignment range. This topology exhibits multiple intersecting power versus coupling coefficient curves given multiple switching frequencies. The coupling range, and associated misalignment range, can be extended without increasing power and current variability by changing the switching frequency strategically at curve intersections. Parameter design and selection of the number of switching frequencies are presented. Fundamental relationships between power variation and coupling range are established. With this approach, a choice of two suitable switching frequencies changes output power by only 10% over a coupling coefficient range from 0.14 to 0.35. Three frequencies can support lower power variation or a wider coupling range. Primary current at low coupling is lower with the strategy than for conventional alternatives because reactive power can be limited. A 1.5 kW prototype has been prepared to verify the topology. The prototype confirms a power variation of 10% over a coupling coefficient range from 0.14 to 0.35 with two frequencies. With three frequencies, power variation drops to 6.7% over the same coupling range.

Concentric-coil Hybrid IPT System with Improved Tolerance to Coupling and Load Variations

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

A Hybrid IPT System with High-Misalignment Tolerance and Inherent CC–CV Output Characteristics for EVs Charging Applications

Detuned Dual-Frequency Compensation for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Tuning Method Based T-model for LCC/S Compensated IPT System with Constant Current Output Characteristics

An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.

A Novel Loosely Coupled Transformers with High Misalignment Tolerance

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

Minimizing Current in Inductive Power Transfer Systems With an Asymmetrical Factor for Misalignment Tolerance and Wide Load Range

An Inductive Power Transfer Charging System With a Multiband Frequency Tracking Control for Misalignment Tolerance

Analysis and Design of Multifrequency Compensation Strategy for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Reconfigurable Topology Based on Multi-Frequency Compensation for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.

All-Detuned Three-Coil Configuration for Advantages in Inductive Power Transfer Systems

Analysis of a Three-Coil Series-Parallel-Series Topology Based on Asymmetrical Factor Method in Inductive Power Transfer System for Misalignment with Constant Current Output

An Orthogonal Decoupled Transformer Design for Inductive Power Transfer Applications

IPT system with misalignment tolerance and constant voltage output based on BP coupling pad optimization design

Novel IPT system for enhanced efficiency and anti-misalignment capability