Abstract:In inductive power transfer systems, misalignment can lead to inconsistent output power. In this article, a topology based on a primary-side detuned multifrequency compensation circuit is proposed to provide consistent output over a wide misalignment range. This topology exhibits multiple intersecting power versus coupling coefficient curves given multiple switching frequencies. The coupling range, and associated misalignment range, can be extended without increasing power and current variability by changing the switching frequency strategically at curve intersections. Parameter design and selection of the number of switching frequencies are presented. Fundamental relationships between power variation and coupling range are established. With this approach, a choice of two suitable switching frequencies changes output power by only 10% over a coupling coefficient range from 0.14 to 0.35. Three frequencies can support lower power variation or a wider coupling range. Primary current at low coupling is lower with the strategy than for conventional alternatives because reactive power can be limited. A 1.5 kW prototype has been prepared to verify the topology. The prototype confirms a power variation of 10% over a coupling coefficient range from 0.14 to 0.35 with two frequencies. With three frequencies, power variation drops to 6.7% over the same coupling range.

Minimizing Current in Inductive Power Transfer Systems With an Asymmetrical Factor for Misalignment Tolerance and Wide Load Range

Minimizing Primary Current Based on Asymmetric Parameter Design Method under Wide Load Range and Variable Coupling Condition in Inductive Power Transfer Systems

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Analysis of a Three-Coil Series-Parallel-Series Topology Based on Asymmetrical Factor Method in Inductive Power Transfer System for Misalignment with Constant Current Output

Analysis and Design of Multifrequency Compensation Strategy for Wide Misalignment Tolerance in Inductive Power Transfer Systems

An Inductive Power Transfer Charging System With a Multiband Frequency Tracking Control for Misalignment Tolerance

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

Detuned Dual-Frequency Compensation for Wide Misalignment Tolerance in Inductive Power Transfer Systems

An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.

Balanced Design Method for LCL/LCL Compensation Achieving Wide Load Range and High Misalignment Tolerance

Reconfigurable Topology Based on Multi-Frequency Compensation for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

An Orthogonal Decoupled Transformer Design for Inductive Power Transfer Applications

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

A Nonmonotonic Parameter Design Approach for Compact Capacitive Power Transfer

A Gyrator-Based Converting-Splitting Method of Designing Inductive Power Transfer Systems with Constant Current and Constant Voltage Charging

A Hybrid IPT System with High-Misalignment Tolerance and Inherent CC–CV Output Characteristics for EVs Charging Applications

A Method of Resonant Frequency Optimized Selection for a SP Inductive Coupled Power Transfer System

A Dual-Source Inductive Power Transfer System Optimized with Large Misalignment Tolerance

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.