Abstract:When an inductive power transfer (IPT) system conducts wireless charging for electric cars, the coupling coefficient between the coils is easily affected by fluctuations in the external environment. With frequent changes in the battery load impedance, it is difficult for the IPT system to achieve constant-voltage and constant-current (CVCC) controls. A CVCC control method is proposed for the IPT system that has a double-sided LCC compensation structure based on full-bridge synchronous rectification. The proposed method achieved good dynamic stability and was able to effectively switch between the output current and voltage of the system by adjusting only the duty cycle of the switch on the secondary side of the rectification bridge. As a result, the system efficiency was improved. The output characteristics of the double-sided LCC compensation structure was derived and the conduction condition with zero voltage was analyzed by using four switches through two conduction time series of the rectifier circuit. Then, the output voltage of the synchronized rectifier was derived. The hardware implementation of the full-bridge controllable rectifier was described in detail. Finally, a MATLAB/Simulink 2018a simulation model was developed and applied to an 11 kW prototype to analyze and validate the design. The results showed that the designed system had good CVCC output characteristics and could maintain constant output under certain coupling offsets. Compared with semi synchronous rectification methods, the proposed method had a higher efficiency, which was 95.6% at the rated load.

An IPT System with Constant Current and Constant Voltage Output Features for EV Charging

Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit

A Hybrid IPT System with High-Misalignment Tolerance and Inherent CC–CV Output Characteristics for EVs Charging Applications

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.

A Gyrator-Based Converting-Splitting Method of Designing Inductive Power Transfer Systems with Constant Current and Constant Voltage Charging

An Inductive Power Transfer Charging System With a Multiband Frequency Tracking Control for Misalignment Tolerance

Design and Analysis of the Load Adaptive Ipt System Applied to Underwater Docking System

Analysis and Design of Wireless Charging Systems Without Extra Components for Load-Independent Constant Current and Voltage Battery Charging

An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

A Heterogeneous Inductive Power Transfer System for Electric Vehicles with Spontaneous Constant Current and Constant Voltage Output Features

An Orthogonal Decoupled Transformer Design for Inductive Power Transfer Applications

A Three-Coil IPT Charger With CC and CV Outputs Through Circuit Reconfiguration

Constant-Voltage and Constant-Current Controls of the Inductive Power Transfer System for Electric Vehicles Based on Full-Bridge Synchronous Rectification

A reconstructed LCC‐LCC compensated inductive power transfer system with inherent constant current to constant voltage transition capability

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

A Constant Current Wireless Power Transfer Scheme with Asymmetric Loosely Coupled Transformer for Electric Forklift

An Asymmetrical Loosely Coupled Transformer and Constant Current Wireless Charging Scheme for Warehouse Vehicles

Synthesis of Inductive Power Transfer Converters with Dual Immittance Networks for Inherent CC-to-CV Charging Profiles

Enhancing V2G Applications: Analysis and Optimization of a CC/CV Bidirectional IPT System with Wide Range ZVS