Abstract:In inductive power transfer systems, misalignment can lead to inconsistent output power. In this article, a topology based on a primary-side detuned multifrequency compensation circuit is proposed to provide consistent output over a wide misalignment range. This topology exhibits multiple intersecting power versus coupling coefficient curves given multiple switching frequencies. The coupling range, and associated misalignment range, can be extended without increasing power and current variability by changing the switching frequency strategically at curve intersections. Parameter design and selection of the number of switching frequencies are presented. Fundamental relationships between power variation and coupling range are established. With this approach, a choice of two suitable switching frequencies changes output power by only 10% over a coupling coefficient range from 0.14 to 0.35. Three frequencies can support lower power variation or a wider coupling range. Primary current at low coupling is lower with the strategy than for conventional alternatives because reactive power can be limited. A 1.5 kW prototype has been prepared to verify the topology. The prototype confirms a power variation of 10% over a coupling coefficient range from 0.14 to 0.35 with two frequencies. With three frequencies, power variation drops to 6.7% over the same coupling range.

A Parameter Identification and Control Method Based on Compensation Topology With Strong Misalignment Tolerance

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Minimizing Primary Current Based on Asymmetric Parameter Design Method under Wide Load Range and Variable Coupling Condition in Inductive Power Transfer Systems

Minimizing Current in Inductive Power Transfer Systems With an Asymmetrical Factor for Misalignment Tolerance and Wide Load Range

Tuning Method Based T-model for LCC/S Compensated IPT System with Constant Current Output Characteristics

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

Design of LCC-S Compensation Topology and Optimization of Misalignment Tolerance for Inductive Power Transfer

Analysis and Design of Multifrequency Compensation Strategy for Wide Misalignment Tolerance in Inductive Power Transfer Systems

Analysis of a Three-Coil Series-Parallel-Series Topology Based on Asymmetrical Factor Method in Inductive Power Transfer System for Misalignment with Constant Current Output

An Inductive Power Transfer Charging System With a Multiband Frequency Tracking Control for Misalignment Tolerance

Balanced Design Method for LCL/LCL Compensation Achieving Wide Load Range and High Misalignment Tolerance

Investigation on Different Compensation Topologies in Inductively Coupled Power Transfer System

An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.

An Integrated Inductive Power Transfer System Design with a Variable Inductor for Misalignment Tolerance and Battery Charging Applications

Detuned Dual-Frequency Compensation for Wide Misalignment Tolerance in Inductive Power Transfer Systems

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

An LCC-SP Compensated Inductive Power Transfer System and Design Considerations for Enhancing Misalignment Tolerance.

Analysis and Design of High-Misalignment-Tolerant Compensation Topologies with Constant-Current or Constant-Voltage Output for IPT Systems

Analysis and Design of an IPT System Based on S/SP Compensation with Improved Output Voltage Regulation.

Modified Parameter Tuning Method for LCL/P Compensation Topology Featured with Load-Independent and LCT-unconstrained Output Current

A Parameter Identification Approach in Inductive Power Transfer Systems for Light Electric Vehicles