Abstract:The poor high‐temperature tribological performance of diamond‐like carbon (DLC) films severely limits their applications. To address this issue, silicon (Si) doped DLC films with Si content ranging from 0 to 11.52 at.% were synthesized utilizing the plasma‐assisted reactive magnetron sputtering technique. The influence of Si incorporation on the microstructure and mechanical properties was meticulously investigated by Raman spectroscopy, scanning electron microscope (SEM), X‐ray photoelectron spectroscopy (XPS), nanoindentation, and scratch testing. To ascertain the tribological behavior of the Si‐DLC films under elevated temperature conditions, in situ high‐temperature tests were conducted, spanning temperatures from ambient to 500°C. The findings indicated that distinct lubrication mechanisms prevail for Si‐DLC films with varying Si content across different temperature domains. As the test temperature and Si content increased, the lubrication mechanism exhibited a gradual transitions from high‐temperature induced graphitization to a particle wear regime dominated by SiC and formed SiO2 abrasive phases. The comprehensive performance of the films peaked at a Si content of 4.72 at.%, suggesting an optimal composition for high‐temperature applications. It is postulated that the in‐depth investigation presented herein holds considerable value for the design and fabrication of DLC films intended for use in high‐temperature settings, potentially unlocking their full potential in such demanding environments.

Microstructure and high-temperature tribological properties of Ti/Si co-doped diamond-like carbon films fabricated by twin-targets reactive HiPIMS

Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

High temperature tribology behavior of silicon and nitrogen doped hydrogenated diamond-like carbon (DLC) coatings

The High‐temperature Tribological Properties of Si‐DLC Films

Influences of different temperatures on the mechanical properties and wear resistance against Ti6Al4V of Ti doped diamond-like carbon deposited on cemented carbide

High-temperature tribological properties of diamond-like carbon films: A review

High-temperature tribological properties of Si 3 N 4 /TiC ceramic with bionic surface textures and DLC coatings

Fabrication and high-temperature tribological performance of doped diamond film with B, N, and Si elements

Binary elements (Si, Mo) co-doping strategy enhanced the tribological performance of diamond-like carbon films

High-temperature Tribological Properties of Si3N4/TiC Ceramic with Bionic Surface Textures and DLC Coatings

Microstructural evolution and tribology of Mo-doped diamond like carbon nanocomposite film

Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions

Effects of silicon doping on low-friction and high-hardness diamond-like carbon coating via filtered cathodic vacuum arc deposition

The Effects of Ti/Ni Doping on the Friction and Wear Properties of DLC Coatings

Structure and mechanical properties of Ti alloyed DLC films

Effects of high-velocity oxygen fuel metal-ceramic interlayer on the mechanical and tribological properties of Si/DLC-coated Ti-6Al-4V alloy

Annealing Effect on Microstructure of Novel Ti Doped DLC Multilayer Films

Exploring long-run reciprocating Wear of diamond-like carbon coatings: microstructural, morphological and tribological evolution

Influence of methane flow ratios on the structural and mechanical properties of Ti-doped diamond-like carbon films

Preparation and Tribological Properties of DLC/Ti Film by Pulsed Laser Arc Deposition