Effects of high-velocity oxygen fuel metal-ceramic interlayer on the mechanical and tribological properties of Si/DLC-coated Ti-6Al-4V alloy

Chenglong Mou,Pingmei Yin,Wenbo Li,Fu Wang,Xueqian Cao,Qianxi Liu,Lunlin Shang,Guangan Zhang

DOI: https://doi.org/10.1016/j.diamond.2023.109831

IF: 3.806

2023-05-01

Diamond and Related Materials

Abstract:A duplex coating consisting of a Cr3C2-NiCr or WC-Co thick interlayer and a top Si/DLC film was deposited on the surface of titanium alloy by combining high-velocity oxygen fuel (HVOF) and plasma-assisted chemical vapor deposition (PACVD). The HVOF interlayer was composed of 80 % Cr3C2 and 20 % NiCr, or 75 % WC and 25 % Co. Subsequently, the duplex coating was compared with the single Si/DLC film in terms of structural composition, mechanical and tribological properties. It was concluded that the duplex coating has slightly higher surface roughness but better load-bearing capacity and mechanical properties. In a tribological test, the duplex coating exhibited better tribological properties under high loading conditions, which is due to the increase in adhesion between the film and substrate because of the addition of the metal-ceramic interlayer, which helps to improve its tribological properties.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films