Abstract:To improve the applicability of a-C coatings in a wide temperature range, a novel Si- and WC- co-reinforced amorphous carbon coating (SiC-nWCC), consisting of Si-doped a-C nanolayers and WC/a-C nano-multilayers, is proposed in this paper. A series of SiC-nWCC coatings with different modulation ratios (0.49–1.98) were fabricated by a closed field unbalanced magnetron sputtering system. The influences of modulation ratio on the microstructure, mechanical properties together with thermal stability of SiC-nWCC coatings were explored. The tribological behaviors of SiC-nWCC coatings against M50 steel balls were investigated at room temperature to 500 °C in ambient air. The results show that the SiC-nWCC coating with the modulation ratio of 1.98 achieved superior wide-temperature applicability, featuring the average friction coefficient lower than 0.17 and the wear rate less than 9.84 × 10 −6 mm 3 /N·m in the whole temperature range of 25–500 °C. The excellent wide-temperature tribological performance of the SiC-nWCC coating are mainly attributed to the good thermal stability and the formation of temperature adaptive tribological layers. At 25 °C, sp 2 -rich carbon is the main lubrication phase of tribological layers, and at 200– 400 °C, the lubrication performance of coating relies on both sp 2 -rich carbon and Si-rich oxides, and at 500 °C, the self-lubrication phases of Si-rich oxides and WO 3 are account for the outstanding lubricating performance of coating. This work provides a profound insight for developing the wide-temperature applicable a-C based coatings.

High-temperature tribological properties of Si 3 N 4 /TiC ceramic with bionic surface textures and DLC coatings

High-temperature Tribological Properties of Si3N4/TiC Ceramic with Bionic Surface Textures and DLC Coatings

Tribological performance of DLC-coated ceramics against cemented carbide under dry sliding conditions

Microstructure and high-temperature tribological properties of Ti/Si co-doped diamond-like carbon films fabricated by twin-targets reactive HiPIMS

High temperature solid/liquid lubrication behaviours of DLC films

Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic

High temperature tribology behavior of silicon and nitrogen doped hydrogenated diamond-like carbon (DLC) coatings

Influences of different temperatures on the mechanical properties and wear resistance against Ti6Al4V of Ti doped diamond-like carbon deposited on cemented carbide

High-temperature tribological properties of AlCrN coatings deposited on textured surfaces under dry friction

Tailoring the mechanical and high‐temperature tribological properties of Si‐DLC films by controlling the Si content

Tribological Properties of Ti3SiC2 Coupled with Different Counterfaces

Tribological behavior of a novel Si- and WC- co-reinforced a-C multilayer coating at 25– 500 °C

Tribological behaviors of TiSiC coating in seawater environment

The High‐temperature Tribological Properties of Si‐DLC Films

Tribological properties of self-healing NiCrAlY/Cr3C2-Ti3AlC2 coating at high temperatures

High temperature tribological performance and thermal conductivity of thick Ti/Ti-DLC multilayer coatings with the application potential for Al alloy pistons

Effect of Ti3SiC2 addition on microstructure and tribological property of laser cladded NiCrAl–WC–Ti3SiC2 composite coatings at 500 °C

Microstructure evolution and high-temperature tribological behavior of Ti3SiC2 reinforced Ni60 composite coatings on 304 stainless steel by laser cladding

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

Different tribological behaviors of titanium alloys modified by thermal oxidation and spraying diamond like carbon

Tribological behaviour of TiB2-HfC ceramic tool material under dry sliding condition