Abstract:Poly(p-phenylene terephthalamide) (PPTA) and ultra-high-molecular-weight polyethylene (UHMWPE) are high-performance polymer materials largely used for body armor applications. Although composite structures from a combination of PPTA and UHMWPE have been created and described in the literature, the manufacture of layered composites from PPTA fabrics and UHMWPE films with UHMWPE film as an adhesive layer has not been reported. Such a new design can provide the obvious advantage of simple manufacturing technology. In this study, for the first time, we prepared PPTA fabrics/UHMWPE films laminate panels using plasma treatment and hot-pressing and examined their ballistic performance. Ballistic testing results indicated that samples with moderate interlayer adhesion between PPTA and UHMWPE layers exhibited enhanced performance. A further increase in interlayer adhesion showed a reverse effect. This finding implies that optimization of interface adhesion is essential to achieve maximum impact energy absorption through the delamination process. In addition, it was found that the stacking sequence of the PPTA and UHMWPE layers affected ballistic performance. Samples with PPTA as the outermost layer performed better than those with UHMWPE as the outermost layer. Furthermore, microscopy of the tested laminate samples showed that PPTA fibers exhibited shear cutting failure on the entrance side and tensile failure on the exit side of the panel. UHMWPE films exhibited brittle failure and thermal damage at high compression strain rate on the entrance side and tensile fracture on the exit side. For the first time, findings from this study reported in-field bullet testing results of PPTA/UHMWPE composite panels, which can provide important insights for designing, fabricating, and failure analysis of such composite structures for body armors.

RESEARCH ON SURFACE MODIFICATION OF UHMWPE FIBER AND ITS APPLICATION IN VEHICLE ARRESTING DEVICE

Research progress on surface modification and application status of UHMWPE fiber

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques

Study of UHMWPE Fiber Surface Modification and the Properties of UHMWPE/Epoxy Composite

Interfacial performance and impact resistance of argon plasma treated UHMWPE/STF inter-ply hybrid composites

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Improvement of UHMWPE Fibers Interfacial Properties by Aminosilane/silica Synergistic Modification

Synergistically improving interface behavior by designing physical twisting structure and "rigid-flexible" interface layer on ultra-high molecular weight polyethylene (UHMWPE) fiber surface

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Superior Enhancement of the UHMWPE Fiber/Epoxy Interface through the Combination of Plasma Treatment and Polypyrrole In-Situ Grown Fibers

A Universal Strategy for Rapid and Scalable Surface Modification of Ultra High Molecular Weight Polyethylene Fiber

Bio-inspired copper ion-chelated chitosan coating modified UHMWPE fibers for enhanced interfacial properties of composites

Influence of surface polyurea coating on the ballistic performance of kevlar fabric

Surface modification of ultra‐high molecular weight polyethylene fiber by different kinds of SiO2 nanoparticles

Anti-Ballistic Performance of PPTA/UHMWPE Laminates

Synergetic enhancement of interfacial properties and impact resistant of UHMWPE fiber reinforced composites by oxygen plasma modification

Properties of UHMWPE Fibre Reinforced Composites

Preparation and Performance of Carbon Nanotubes Reinforced Ultra-high Molecular Weight Polyethylene Fibre-based Composites

Influences of weaving architectures and impact locations on the ballistic resistance of UHMWPE fabric

Anti-ballistic properties of hybrid UHMWPE fiber-reinforced composite armour

Air Plasma-Nano ZnO Coating Improves the Impact Resistance of Ultra-High Molecular Weight Polyethylene Fiber