Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites
Jian-Dong Wu,Li-Ping Guo,Bo Chen,Bang-Cheng Lyu,Xiang-Peng Fei,Run-Song Bian
DOI: https://doi.org/10.1016/j.cemconcomp.2022.104852
IF: 9.93
2022-11-13
Cement and Concrete Composites
Abstract:Ultra-high molecular weight polyethylene (PE) fiber with startling mechanical properties and elastic modulus is considered as an ideal reinforcing component for Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCCs). However, the fiber/matrix interface bonding is weakened due to the hydrophobic nature of the PE fiber surface, restricting the perfect expression of the PE fiber inherent characteristics. In this work, a promising technology for the PE fiber surface functionalization using a combination of bio-inspired polydopamine (PDA) and deposited nano-SiO 2 was proposed to enhance the fiber/matrix interfacial bonding in UHS-HDCCs. The results showed that PDA produced a uniform coating layer on the surface of PE fiber, and nano-SiO 2 was successfully grafted to the surface of PE fiber through PDA as a bridge. The coated PDA and nano-SiO 2 layers enhanced the wettability of the PE fiber surface. Nano-SiO 2 layers provided nucleation sites and reaction raw materials for C–S–H gel. Moreover, the SiO 2 -PDA-PE fibers improved the ultimate tensile stress and tensile strain capacity of UHS-HDCCs to be 116.3% and 133.5% respectively, compared to that of UHS-HDCCs incorporating pristine PE fiber. Furthermore, the SiO 2 -PDA-PE fibers effectively reduced the crack width and crack spacing while increasing the number of cracks and energy absorption capacity of UHS-HDCCs when subjected to increasing uniaxial tensile load. The single fiber pullout results showed that both PDA-PE fibers and SiO 2 -PDA-PE fibers enhanced the peak force, chemical bond, frictional bonding stress, slip hardening coefficient, and pullout energy. Obviously, the positive effect of SiO 2 -PDA-PE fibers on the critical parameters of the fiber interface is higher than that of PDA-PE fibers except for the chemical bond. This work explored a novel way to modify the physicochemical performance of PE fiber surface for matching the strain hardening behavior of UHS-HDCCs, which is meant to guide the mix-design optimization of UHS-HDCCs.
construction & building technology,materials science, composites