Abstract:The thermal properties and heat transfer mechanism diagram of UHMWPE fiber/Epoxy composites. The continuous updating and iteration of electronic devices brings about a significant accumulation of heat. It is urgent to enhance the thermal properties of polymer‐based composites to alleviate the heat dissipation problem in the microelectronics industry. In this paper, the hot drawing process was introduced to increase the crystallinity of ultra‐high molecular weight polyethylene (UHMWPE) fiber and improve its thermal conductivity. The ultra‐high molecular weight polyethylene fiber/epoxy resin (UHMWPE fiber/Epoxy) composites with high thermal conductivity were prepared by compositing UHMWPE fiber with epoxy resin under vacuum conditions. Due to the good crystallinity of the UHMWPE fiber (86%), an efficient thermal conduction path is provided for phonons in the axial direction along the fibers. The results show that the thermal conductivity of the composites reaches a maximum of 3.51 W/mK (in‐plane), which is 17.47 times higher than that of the epoxy resin (0.19 W/mK). The thermography pictures indicate that the composites have better heat transfer capacity with an increase in the draw ratio (λ). In addition, the composites also have the characteristics of low density and low electrical conductivity. These researches will provide a new idea for the preparation of all‐polymer composites with high thermal properties. Highlights A hot drawing process was introduced to increase the crystallinity of UHMWPE fiber for improving thermal conductivity. High crystallinity facilitates the reduction of phonon scattering and the transmission of thermal energy by phonons. The obtained polymer composites exhibit an ultra‐high in‐plane thermal conductivity.

Properties of UHMWPE Fibre Reinforced Composites

Fabrication and properties of polypylene matrix composites reinforced by ultrafine bamboo-char

Composites of Polypropylene Reinforced with Ultrafine Bamboo-char: Morphology, Mechanical and Thermal Properties

Investigation of mechanical and wear properties of kaolin filled UHMWPE composites

Tribological Properties of Self-Reinforced Ultra-High Molecular Weight Polyethylene Composites

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Preparation and Properties of Three-dimensional Braided UHMWPE Fiber Reinforced PMMA Composites

Excellent interfacial bonding in UHMWPE fiber/ epoxy resin composites fabricated via a swelling approach

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques

Interfacial structure and properties of CF/PPEK composites

Molding process and properties of polyimide-fiber-fabric-reinforced polyether ether ketone composites

Study of UHMWPE Fiber Surface Modification and the Properties of UHMWPE/Epoxy Composite

Glass fiber/wood flour modified high density polyethylene composites

Low-velocity Impact Behavior of UHMWPE Fabric/thermoplastic Laminates with Combined Surface Treatments of Polydopamine and Functionalized Carbon Nanotubes

Excellent thermal conductive epoxy composites via adding UHMWPE fiber obtained by hot drawing method

Ultra-high molecular weight polyethylene fiber-reinforced thermoplastic corn starch composite

A novel PDA/POSS transition layer on the surface of UHMWPE fibers by co-depositing to improve the mechanical properties of composites

Increasing the Resistance of HDPE to Abrasive Wear with Small Additions of UHMWPE

Investigation on low-velocity impact and interfacial bonding properties of weft-knitted UHMWPE reinforced composites

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics