Abstract:Impact properties of carbon/kevlar composites schematic diagram. In this article, carbon/kevlar hybrid composites were prepared using Vacuum Assisted Resin Infusion (VARI). The sandwich structure with plain carbon weave fabric as the core layer and plain kevlar weave fabric as the surface layer was selected as reinforcement and the solution of epoxy resin and curing agent was selected as matrix. The low velocity impact experiment and compression after impact (CAI) experiment were carried out on the samples at different hybrid ratio and different temperatures, and the mechanical response on the impact loads were analyzed respectively. The results show that the specimen can limit the delamination defect expansion of the surface kevlar fiber as the carbon fiber used as the core layer, which reduce the delamination defect area and improve the impact resistance of the sample. The toughness of the sample improves the brittle failure mode, that is, the sample still has a certain bearing capacity after the load exceeds the maximum strength, the sandwiched composites presents a positive hybrid effect. With the increase of temperature, the matrix was obviously softened, the macromolecular movement in the system was intensified, the three‐dimensional network macromolecular structure of the matrix and the fiber/matrix interface properties were damaged, and the mechanical properties showed an obvious downward trend. As far as the influences of hybrid ratio and temperature on impact behavior of composite are concerned, it lay a theoretical foundation for the industrial application of carbon/kevlar hybrid composites. Highlights The sandwiched structure was used to design the composites, which greatly improves the impact properties of the specimens. The impact properties and compression after impact properties at different hybrid ratios and different temperatures were studied. Based on the hybrid effect and temperature effect, the impact failure mechanism of the sample was analyzed.

Low‐velocity impact properties of carbon fiber/ultrahigh molecular weight polyethylene fiber hybrid composites

Effect of Volume Ratio and Hybrid Mode on Low-Velocity Impact Properties of Unidirectional Flax/carbon Fiber Hybrid Reinforced Polymer Composites

Low velocity impact behavior and simulation of parametric effect analysis for UHMWPE/LLDPE thermoplastic composite laminates

High‐velocity impact resistance and energy absorption behavior of Carbon‐Kevlar hybrid composite laminates

Effects of Fiber Architectures on the Impact Resistance of Composite Laminates Under Low-Velocity Impact

Impact responses and residual flexural properties of narrow CFRP laminates

Low-velocity Impact Behavior of UHMWPE Fabric/thermoplastic Laminates with Combined Surface Treatments of Polydopamine and Functionalized Carbon Nanotubes

Low-velocity impact damage research on 2-dimentional UHMWPE/CF hybrid woven laminates under preloading

Low-velocity impact response of 3D woven hybrid epoxy composites with carbon and heterocyclic aramid fibres

Low-velocity impact and compression-after-impact behaviors of twill woven carbon fiber/glass fiber hybrid composite laminates with flame retardant epoxy resin

Research on low‐velocity impact resistance of carbon fiber composite laminates

Low-Velocity Impact Resistance and Compression After Impact Strength of Thermoplastic Nanofiber Toughened Carbon/Epoxy Composites with Different Layups

Low‐velocity impact damage tolerance of ultrahigh molecular weight polyethylene/ carbon fiber laminates under prestress

Improving Compression-after-impact Performance of Carbon–fiber Composites by CNTs/thermoplastic Hybrid Film Interlayer

Low-velocity impact performance of ultra-high molecular weight polyethylene/aramid-polyester core-spun yarn hybrid composites

Low-velocity impact and static behaviors of high-resilience thermal-bonding inter/intra-ply hybrid composites

Multiple Impact Resistance of Hybrid Fiber Ultrahigh Toughness Cementitious Composites with Different Degrees of Initial Damage

Study on impact properties of carbon/kevlar fiber hybrid composites

Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates

Design of Damage-Resistant Hybrid Lay-Up Structures for Fiber-Reinforced Composites Based on Interface Properties

Impact Response of Hybrid Carbon/glass Fibre Reinforced Polymer Composites Designed for Engineering Applications