Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor

Mijin Won,Minhun Jung,Jaehwan Kim,Dong-Soo Kim

DOI: https://doi.org/10.3390/nano14040343

IF: 5.3

2024-02-10

Nanomaterials

Abstract:This paper reports a high-performance humidity sensor made using a novel cellulose nanofiber (CNF)–silver nanoparticle (AgNP) sensing material. The interdigital electrode pattern was printed via reverse-offset printing using Ag nano-ink, and the sensing layer on the printed interdigitated electrode (IDE) was formed by depositing the CNF-AgNP composite via inkjet printing. The structure and morphology of the CNF-AgNP layer are characterized using ultraviolet–visible spectroscopy, an X-ray diffractometer, field emission scanning electron microscopy, energy-dispersive X-ray analysis, and transmission electron microscopy. The humidity-sensing performance of the prepared sensors is evaluated by measuring the impedance changes under the relative humidity variation between 10 and 90% relative humidity. The CNF-AgNP sensor exhibited very sensitive and fast humidity-sensing responses compared to the CNF sensor. The electrode distance effect and the response and recovery times are investigated. The enhanced humidity-sensing performance is reflected in the increased conductivity of the Ag nanoparticles and the adsorption of free water molecules associated with the porous characteristics of the CNF layer. The CNF-AgNP composite enables the development of highly sensitive, fast-responding, reproducible, flexible, and inexpensive humidity sensors.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

The problem this paper attempts to address is the development of a high-performance humidity sensor. Specifically, the researchers have developed a highly sensitive and fast-responding humidity sensor by applying silver nanoparticles (AgNPs) to cellulose nanofibers (CNF) using an all-printing process. This sensor aims to meet the demand for high sensitivity and fast response humidity sensors in a wide range of applications, particularly in environmental monitoring, smart agriculture, smart logistics, packaging, and storage.

### Main Objectives:
1. **Improve the performance of the humidity sensor**: Enhance the sensitivity and response speed of the sensor by combining CNF and AgNPs.
2. **Adopt an all-printing process**: Utilize reverse offset printing and inkjet printing technologies to achieve efficient and low-cost manufacturing of the sensor.
3. **Validate the sensor's performance**: Evaluate the sensor's performance under different relative humidity conditions through experimental testing, including metrics such as response time, recovery time, and linearity.

### Key Points of the Solution:
- **Material Selection**: Use CNF and AgNPs as sensing materials, where CNF has good hydrophilicity and porous characteristics, and AgNPs provide high conductivity.
- **Manufacturing Process**: Use reverse offset printing technology to create interdigitated electrodes (IDE) and deposit the CNF-AgNP composite material through inkjet printing to form the sensing layer.
- **Performance Testing**: Test the impedance change of the sensor in the relative humidity range of 10% to 90% to evaluate its sensitivity and response characteristics.

### Experimental Results:
- **High Sensitivity**: The CNF-AgNP sensor exhibits excellent humidity response performance with a sensitivity of 0.0654 (log∆R/%RH) at a 40 µm electrode spacing, almost twice that of a pure CNF sensor.
- **Fast Response**: The sensor's response time and recovery time are 4 seconds and 34 seconds, respectively, outperforming existing all-cellulose humidity sensors.
- **Linear Response**: The sensor shows nearly linear response over a wide humidity range, making it suitable for practical applications.

### Conclusion:
By combining AgNPs with CNF and adopting an all-printing process, the researchers successfully developed a highly sensitive and fast-responding humidity sensor. This sensor not only has superior performance but also offers low manufacturing costs and the potential for large-scale production, making it promising for widespread application in various fields.