Abstract:With the growing requirements for the renewability and sustainability of electronic products, environmentally friendly cellulose-based materials have attracted immense research interests and gained increasing prominence for electronic devices. Humidity sensors play an essential role in industries, agriculture, climatology, medical services, and daily life. Here, for the first time, we fabricate capacitive humidity sensors based on ionic conductive wood-derived cellulose nanopapers (WCNs). The WCN-based humidity sensors exhibited ultrahigh sensitivity, fast response, small hysteresis, and more importantly, a wide working range of relative humidity (RH). The sensors showed >10<sup>4</sup> times increase in the sensing signal over the 7–94% RH range at 20 Hz, while many reported humidity sensors with high sensitivity often have the working range limited to high RH levels. Our sensors can realize the distinction of nuances in humidity and exhibit outstanding noncontact skin humidity sensing properties. Flexible WCN-based humidity sensors were also fabricated, and they displayed excellent sensing properties with long-time stability, endowing them with multifunctional applications. The contrast humidity sensing experiment compared to the existing commercial humidity sensor further demonstrated the higher and faster response of our WCN-based sensors. Thus, this work provides effective guidance for the design of high-performance humidity sensors using nanopapers and opens a new dimension for a variety of future applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12868?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12868</a>.Humidity sensing properties of capacitive sensors based on different materials and based on paper; FTIR spectrum of 40 μm thick WCNs; EDX spectrum of 40 μm thick WCNs; weight percent and atomic percent of each element in WCNs; XPS spectra of pristine paper and WCNs; three response/recovery cycles of WCNs (1.0 μm thick film) by switching between 7% RH air and 60% RH air; thickness graphs of three WCN films of 6 μL, 12 μL, and 18 μL of WCN solution measured by AFM; and EIS curves of a WCN-based sensor with a 2.5 μm thick film under different 36, 47, and 61, 75, and 83% RH conditions from 20 Hz to 100 kHz (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12868/suppl_file/am0c12868_si_001.pdf">PDF</a>)Movie of the water-spraying test for a commercial hygrometer (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12868/suppl_file/am0c12868_si_002.mp4">MP4</a>)Noncontact skin humidity sensing performance by putting the moist hand and dry hand, respectively, without gloves at a fixed distance of 2 cm from the sensors (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12868/suppl_file/am0c12868_si_003.pdf">PDF</a>)This article has not yet been cited by other publications.

Cellulose nanofiber/MXene/AgNWs composite nanopaper with mechanical robustness for high-performance humidity sensor and smart actuator

Nacre-inspired Cellulose Nanofiber/mxene Flexible Composite Film with Mechanical Robustness for Humidity Sensing

MXene/MWCNT Electronic Fabric with Enhanced Mechanical Robustness on Humidity Sensing for Real-Time Respiration Monitoring

Onion-inspired MXene/chitosan-quercetin Multilayers: Enhanced Response to H2O Molecules for Wearable Human Physiological Monitoring

Cellulose Nanofiber/Carbon Nanotube Dual Networks Enabled Humidity Sensor with High Sensitivity and Durability.

Interlayer Cross-Linked Mxene Enables Ultra-Stable Printed Paper-Based Flexible Sensor for Real-Time Humidity Monitoring

Polydopamine-modified MXene/cellulose nanofibers composite film for self-powered humidity sensing and humidity actuating

Cellulose nanofibers-based composite film with broadening MXene layer spacing and rapid moisture separation for humidity sensing and humidity actuators

Electrostatic self-assembly enabled flexible paper-based humidity sensor with high sensitivity and superior durability

Printing assembly of flexible devices with oxidation stable MXene for high performance humidity sensing applications

Ultrathin Niobium Carbide Nanosheets for Humidity Sensing

All-Printed Mxene/Ws2-Based Flexible Humidity Sensor for Multi-Scenario Applications

Microgram-Level Ta4C3 Nanosheets Decorated with NiWO4 Nanoparticles As a High-Performance Humidity Sensor

Carrageenan-modified MXene Nanocomposite-Based All-Printed Flexible Humidity Sensor for Healthcare Application

Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor

Nanochitin/MXene Composite Coated on Quartz Crystal Microbalance for Humidity Sensing

Mxene Nanosheets Preparation Sensitive Film for QCM Humidity Sensor

Non-Contact Humidity Monitoring: Boosting the Performance of All-Printed Humidity Sensor Using Pdda-Modified Ti3c2tx Nanoribbons

Flexible Capacitive Humidity Sensors Based on Ionic Conductive Wood-Derived Cellulose Nanopapers

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

Bacterial cellulose/MWCNT coatings for highly sensitive and flexible paper-based humidity sensors