Abstract:In recent years, LC resonant sensors have gained widespread attention for their extensive applications in industries such as pharmaceutical storage and food transportation. A wireless passive sensor with a good sensing performance is proposed based on a GO/CNT−OH/Nafion nanocomposite. The sensor was fabricated via inkjet printing technology, and the surface morphology of the GO/CNT−OH/Nafion nanocomposite was characterized by SEM measurement. It is found that the MWCNTs support the GO layer and the hydrophobic chains of Nafion interact with the hydrophobic layer of GO, resulting in a larger cavity and hydrophilic surface of the entire material. This structure well reflects the fact that the mixing of MWCNTs and Nafion provides the entire material with a stronger water absorption. The experimental study shows that the proposed humidity sensor has a frequency variation of 103 kHz/%RH at low humidity (30–60% RH) and a sensitivity of 931 kHz/%RH at high humidity (60–95% RH), while the sensitivity value from 30–95% RH is 547 kHz/% RH. The response time and recovery time are 110 s and 115 s, respectively. In addition, the tests showed that the GO/CNT−OH/Nafion nanocomposite applied to the humidity sensor had a maximum humidity hysteresis of about 3% RH at 30–95% RH, the resonant frequency remained basically unchanged after 50 h of testing, and the whole sensor possessed a good stability. After conducting several repeated experiments, it was found that the resonant frequency error of the whole sensor was low and did not affect the overall sensing test, which proved the reproducible preparation of the sensor. Finally, the humidity-sensing mechanism of the proposed sensor was analyzed in this paper, and it was found that GO enhanced the hygroscopic properties of GO/CNT−OH/Nafion nanocomposite when it was supported by MWCNT-OH and included uniformly dispersed Nafion. Therefore, our proposed humidity sensor is suitable for humidity detection above 30% RH in both sealed and open environments.

Cellulose Nanofibers/Reduced Graphene Oxide Nanocomposites for Humidity Sensor

Flexible Humidity Sensors with High Water-Resistance Based on a Composite of Sodium Carboxymethyl Cellulose, Graphene Oxide and 3-Glycidyloxypropyl Trimethoxysilane

Graphene oxide/cellulose nanofiber-based capacitive humidity sensor with high sensitivity

Asymmetrically Patterned Cellulose Nanofibers/Graphene Oxide Composite Film for Humidity Sensing and Moist-Induced Electricity Generation

Nanocellulose-assisted Dispersion of Graphene to Fabricate Poly(vinyl Alcohol)/graphene Nanocomposite for Humidity Sensing

Facilely prepared composites of polyelectrolytes and graphene as the sensing materials for the detection of very low humidity

Carbon Nanotubes/Graphene Oxide Composite Applications in Fiber RH Sensor

Elucidation of rGO Incorporation on Structural, Morphological and Optical Properties of rGO/ZnO Nanocomposites for Flexible Humidity Sensor Applications

Regulating the Microstructure and Hydrophilicity of Cellulose Nanofibers Using Taurine and the Application in Humidity Sensor and Actuator

Carboxymethyl Cellulose/Graphene Oxide Composite Film-Coated Humidity Sensor Based on Thin-Core Fiber Mach-Zehnder Interferometer

Fully Printed Cellulose Nanofiber–Ag Nanoparticle Composite for High-Performance Humidity Sensor

A Cellulose Nanofiber Capacitive Humidity Sensor with High Sensitivity and Fast Recovery Characteristics

Electrically Conductive Thin Films Based on Nanofibrillated Cellulose: Interactions with Water and Applications in Humidity Sensing

Cellulose Nanofiber/Carbon Nanotube Dual Networks Enabled Humidity Sensor with High Sensitivity and Durability.

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

Porous and conductive cellulose nanofiber/carbon nanotube foam as a humidity sensor with high sensitivity

Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity

Printed, all-carbon-based flexible humidity sensor using a cellulose nanofiber/graphene nanoplatelet composite

Ultra-Sensitive and Fast Humidity Sensors Based on Direct Laser-Scribed Graphene Oxide/Carbon Nanotubes Composites

Preparation of Nanocomposite of Graphene and Quaternized Poly(4-vinylpyridine)and investigations on its humidity sensory properties

GO/CNT−OH/Nafion Nanocomposite Humidity Sensor Based on the LC Wireless Method