Abstract:In recent years, LC resonant sensors have gained widespread attention for their extensive applications in industries such as pharmaceutical storage and food transportation. A wireless passive sensor with a good sensing performance is proposed based on a GO/CNT−OH/Nafion nanocomposite. The sensor was fabricated via inkjet printing technology, and the surface morphology of the GO/CNT−OH/Nafion nanocomposite was characterized by SEM measurement. It is found that the MWCNTs support the GO layer and the hydrophobic chains of Nafion interact with the hydrophobic layer of GO, resulting in a larger cavity and hydrophilic surface of the entire material. This structure well reflects the fact that the mixing of MWCNTs and Nafion provides the entire material with a stronger water absorption. The experimental study shows that the proposed humidity sensor has a frequency variation of 103 kHz/%RH at low humidity (30–60% RH) and a sensitivity of 931 kHz/%RH at high humidity (60–95% RH), while the sensitivity value from 30–95% RH is 547 kHz/% RH. The response time and recovery time are 110 s and 115 s, respectively. In addition, the tests showed that the GO/CNT−OH/Nafion nanocomposite applied to the humidity sensor had a maximum humidity hysteresis of about 3% RH at 30–95% RH, the resonant frequency remained basically unchanged after 50 h of testing, and the whole sensor possessed a good stability. After conducting several repeated experiments, it was found that the resonant frequency error of the whole sensor was low and did not affect the overall sensing test, which proved the reproducible preparation of the sensor. Finally, the humidity-sensing mechanism of the proposed sensor was analyzed in this paper, and it was found that GO enhanced the hygroscopic properties of GO/CNT−OH/Nafion nanocomposite when it was supported by MWCNT-OH and included uniformly dispersed Nafion. Therefore, our proposed humidity sensor is suitable for humidity detection above 30% RH in both sealed and open environments.

Carbon Nanotubes/Graphene Oxide Composite Applications in Fiber RH Sensor

Fiber Optic Relative Humidity Sensor Based On The Tilted Fiber Bragg Grating Coated With Graphene Oxide

Carboxymethyl Cellulose/Graphene Oxide Composite Film-Coated Humidity Sensor Based on Thin-Core Fiber Mach-Zehnder Interferometer

High Sensitivity Humidity Detection Based on Functional GO/MWCNTs Hybrid Nano-Materials Coated Titled Fiber Bragg Grating

Polyelectrolyte/Graphene Oxide Nano-Film Integrated Fiber-Optic Sensors for High-Sensitive and Rapid-Response Humidity Measurement

A Humidity Sensor Based on a Singlemode-Side Polished Multimode–Singlemode Optical Fibre Structure Coated with Gelatin

Humidity sensor based on core-offset fiber Mach-Zehnder interferometer coated graphene oxide film

Ultra-Sensitive and Fast Humidity Sensors Based on Direct Laser-Scribed Graphene Oxide/Carbon Nanotubes Composites

Highly sensitive balloon-like fiber interferometer based on GO nanomaterial coated for humidity measurement

Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity

Graphene oxide/cellulose nanofiber-based capacitive humidity sensor with high sensitivity

High-Sensitivity Optical Fiber Humidity Sensor Based on Iridescent Chiral-Oriented Cellulose Nanocrystals/Polyethylene Vinyl Oxide Composite Film

Cellulose Nanofibers/Reduced Graphene Oxide Nanocomposites for Humidity Sensor

High-sensitivity Humidity Sensing of Microfiber Coated with Three-Dimensional Graphene Network

Highly Sensitive Humidity Sensor Based on a GO/Co-MOF-74 Coated Long Period Fiber Grating

Humidity Sensitivity of Carbon Nanotube and Poly (dimethyldiallylammonium Chloride) Composite Films

Facilely prepared composites of polyelectrolytes and graphene as the sensing materials for the detection of very low humidity

GO/CNT−OH/Nafion Nanocomposite Humidity Sensor Based on the LC Wireless Method

Graphitic Carbon Nitride for Enhancing Humidity Sensing of Microfibers

Highly Sensitive Humidity Sensors Based on Polyethylene Oxide/CuO/Multi Walled Carbon Nanotubes Composite Nanofibers

Pt/MOF-5 film-coated optical micro-nano fibre hydrogen sensor with humidity and temperature compensation functions