Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Process Control Monitor (PCM) for Simultaneous Determination of the Piezoelectric Coefficients d31 and d33 of AlN and AlScN Thin Films

In Situ Synchrotron XRD Characterization of Piezoelectric Al1-xScxN Thin Films for MEMS Applications

Experimental and theoretical studies of effective piezoelectric coefficients of 2-2 connectivity AlN/AlScN composite piezoelectric films

Preparation Technique Of Aln Piezoelectric Thin Film

Multiphysics Modeling and Analysis of Sc-Doped AlN Thin Film Based Piezoelectric Micromachined Ultrasonic Transducer by Finite Element Method

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Sample Design in Resonant Ultrasound Spectroscopy for Measuring Material Constants of Scaln Piezoelectric Film

A model for longitudinal piezoelectric coefficient measurement of the aluminum nitride thin films

Design and 3D FEM Analysis of a Flexible Piezoelectric Micromechanical Ultrasonic Transducer Based on Sc-Doped AlN Film

AlScN films prepared by alloy targets and SAW device characteristics

A Strategy for Extracting Full Material Coefficients of AlN Thin Film Based on Resonance Method

Preparation, Characterization, and Application of AlN/ScAlN Composite Thin Films

Deposition, Characterization, and Modeling of Scandium-Doped Aluminum Nitride Thin Film for Piezoelectric Devices

High Performance AlScN Thin Film Based Surface Acoustic Wave Devices with Large Electromechanical Coupling Coefficient

AlScN-Based Dual-Mode Devices With Temperature Compensated Strategy and Process Optimization

A High-Sensitivity MEMS Accelerometer Using a Sc0.8Al0.2N-Based Four Beam Structure

Simultaneous Piezoelectric and Ferroelectric Characterization of Thin Films for MEMS Actuators

High Quality Co-Sputtering AlScN Thin Films for Piezoelectric Lamb-Wave Resonators

The Design of Aluminum Nitride-Based Lead-Free Piezoelectric MEMS Accelerometer System

ScxAl1-xN Piezoelectric Film Grown at Room Temperature

Piezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes