Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

A model for longitudinal piezoelectric coefficient measurement of the aluminum nitride thin films

Preparation Technique Of Aln Piezoelectric Thin Film

A Strategy for Extracting Full Material Coefficients of AlN Thin Film Based on Resonance Method

Process Control Monitor (PCM) for Simultaneous Determination of the Piezoelectric Coefficients d31 and d33 of AlN and AlScN Thin Films

Grain-wise piezoelectric response of polycrystalline aluminum nitride thin films: an empirical investigation using piezo force microscopy

In Situ Synchrotron XRD Characterization of Piezoelectric Al1-xScxN Thin Films for MEMS Applications

Experimental and theoretical studies of effective piezoelectric coefficients of 2-2 connectivity AlN/AlScN composite piezoelectric films

Measurement of nonlinear piezoelectric coefficients using a micromechanical resonator

High speed surface acoustic wave and laterally excited bulk wave resonator based on single-crystal non-polar AlN film

Deposition, Characterization, and Modeling of Scandium-Doped Aluminum Nitride Thin Film for Piezoelectric Devices

In-Situ Thickness Measurement of Porous Alumina by Atomic Force Microscopy and the Reflectance Wavelength Measurement from 400-1000 Nm

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Systematic approach for high piezoelectric AlN deposition

An Investigation of the Structural and Surface Topography of Aluminum Nitride Thin Films Deposited at Low Sputtering Power for Piezoelectric Applications

A Resonant Z-Axis Aluminum Nitride Thin-Film Piezoelectric MEMS Accelerometer

Preparation, Characterization, and Application of AlN/ScAlN Composite Thin Films

A wafer-level characterization method of thin film transverse piezoelectric coefficient evaluation

Sample Design in Resonant Ultrasound Spectroscopy for Measuring Material Constants of Scaln Piezoelectric Film

Asymptotic Effective Piezoelectric Coefficient Solution of Piezoresponse Force Microscopy for a Transversely Isotropic Piezoelectric Film

Piezoelectric Coefficient Measurement of Piezoelectric Thin Films: an Overview

The Design of Aluminum Nitride-Based Lead-Free Piezoelectric MEMS Accelerometer System