Abstract:To meet the requirements of variable input current forms, microstep adjustment, low error coefficient, high output linearity, and the low ripple of macro-microcomposite actuators developed by combining voice coil motors and a giant magnetostrictive actuator, in this study, a design scheme of dual-mode precise programmable current sources based on a field programmable gate array (FPGA) was proposed. First, according to the working principle and control characteristics of macro-microcomposite drivers, an overall circuit system model of a driving power supply was established. Second, based on the circuit operational amplifier principle, an output current equation of the power supply was obtained, and a current switching circuit and a dual-mode current sampling circuit were designed. Finally, an FPGA was used as the current control core, and an incremental PI algorithm was introduced to compensate for the current feedback. The experimental results showed that the precision current source can output two current modes (positive current 0-5 A and positive and negative current -5 to 5 A) under the FPGA control. The average current error coefficient of the output in the two current output modes was ε ≦ 0.006, the maximum nonlinearity was ηmax ≦ 0.005, and the error between the current adjusting step value and the preset value was less than 1%.

Low-cost bidirectional coil driver with microamp precision

A Constant Current LED Driver Based on Flyback Structure with Novel Primary Side Control

A New Current Switch Driver with Improved Dynamic Performance Used for 500ms/s, 12-Bit Nyquist Current-Steering DAC.

A Differential Compensated Air Coil Current Sensor for Switching Current Measurement of Power Devices.

Ultra-low Noise and High Bandwidth Bipolar Current Driver for Precise Magnetic Field Control.

Design of Compact Coils and a Big Stable Current Driver for Feshbach Resonance Researches

Portable Arbitrary Pulse Generator for Driving μCoils for Micromagnetic Neurostimulation

An Improved-Precision Voice Coil Motor Drive Method Utilizing Additional Current Feedback

Development of dual-mode precision current source for macro-microcomposite actuator based on field programmable gate array

A High Linearity Bidirectional Current Driver with Ripple of 21Μa

Large bandwidth and dynamic range current sensor based on micro-PCB Rogowski coil

250mA high-precision dc-current source for joule balance at NIM

A Pwm Based Switching Power Amplifier for Active Magnetic Bearings

A Novel Full-Digital Voice Coil Motor Drive for Wafer Stage

Miniature biplanar coils for alkali-metal-vapor magnetometry

Bidirectional, Analog Current Source Benchmarked with Gray Molasses-Assisted Stray Magnetic Field Compensation

A Miniaturized Rogowski Current Transducer with Wide Bandwidth and Fast Response

Preliminary Design of Bipolar Current Source with High Stability and Low Noise for Driving Coil of Magnets in Accelerators

A Dual 12bit 80MSPS 3.3V Current-Steering DAC for HINOC.

MEMS micro-coils for magnetic neurostimulation

Piezoelectric Driver Based on Current Control