Exploration of Materials for Three-Dimensional NMR Microcoil Production via CNC Micromilling and Laser Etching
Vincent Moxley-Paquette,Jacob Pellizzari,Daniel Lane,Katrina Steiner,Peter M Costa,William W Wolff,Daniel H Lysak,Rajshree Ghosh Biswas,Katelyn Downey,Kiera Ronda,Ronald Soong,Dmitri Zverev,Peter De Castro,Thomas Frei,Danijela Al Adwan-Stojilkovic,Stephan Graf,Simon Gloor,Daniel Schmidig,Rainer Kuemmerle,Till Kuehn,Falko Busse,Nathan Haberer,Jakub Domaszewicz,Ryan Scatena,Andressa Lacerda,Ben Nashman,Jens Anders,Marcel Utz,André J Simpson
DOI: https://doi.org/10.1021/acs.analchem.4c02373
2024-08-20
Abstract:The excellent versatility of 5-axis computer numerical control (CNC) micromilling has led to its application for prototyping NMR microcoils tailored to mass-limited samples (reducing development time and cost). However, vibrations during 5-axis milling can hinder the creation of complex 3D volume microcoils (i.e., solenoids and saddle coils). To address these limitations, a high-resolution NSCNC ELARA 4-axis milling machine was developed with the extra precision required for making complex 3D volume microcoils. Upon investigating the performance of resonators made with various copper-coated dielectrics, resonators with poly(methyl methacrylate) (PMMA) provided the best SNR/line shape. Thus, complex 1.7 mm microcoil designs were machined from Cu-coated PMMA. A milled 6.4 mm solenoid also provided 6.6× the total carbon signal for a 13C-labeled broccoli seed compared to a commercial inverse 5 mm NMR probe (demonstrating potential for larger coil designs). However, the manufacture of coils <1.7 mm with copper-coated PMMA rods was challenging as ∼0.5 mm of remaining PMMA was needed to retain their structural integrity. To manufacture smaller microcoils, both a solenoid and saddle coil (both with 1 mm O.D., 0.1 mm thick walls) were etched from Cu-coated glass capillaries using a UV picosecond laser that was mounted onto an NSCNC 5-axis MiRA7L. Both resonators showed excellent signal and identified a wide range of metabolites in a 13C-labeled algae extract, while the solenoid was further tested on two copepod egg sacs (∼4 μg of total sample). In summary, the flexibility to prototype complex microcoils in-house allows laboratories to tailor microcoils to specific mass-limited samples while avoiding the costs of cleanrooms.