Abstract:We have presented herein the results of microstructure, surface magnetic domains (SMDs), and giant magneto-impedance (GMI) effect of melt-extracted Co68.15Fe4.35Si12.25B11.25Nb2Cu2 amorphous wires for the first time employed by using a cryogenic Joule annealing (CJA) technique with large DC current amplitude. Compared with the conventional JA method, experimental results indicate that the maximum GMI ratio [Delta Z/Z(0)](max) achieves up to 425% at 8.1 MHz with monotonic increase of the axial magnetic field H-ex up to 6.5 Oe for 300 mA (equal to around 1.06 x 10(6) A/dm(-2)) CJA-ed wire, which is about 75% larger than the [Delta Z/Z(0)](max) for the 100 mA (nearly 3.53 x 10(5) A/dm(-2)) JA-ed microwires. The remarkable features of large and linearly sensitive response field (2.5 similar to 6.5 Oe) and the sensitivity of 99.4%/Oe with higher GMI ratio simultaneously make the CJA tailored melt-extracted microwires promising candidate materials for miniaturized GMI sensors. Another interesting result of GMI profiles of 200 mA (appropriately equal to 7.07 x 10(5) A/dm(-2)) CJA-ed wire show a linear response to H-ex (ranging from 10 to 80 Oe or more), this behavior of GMI curves can be explored to fabricate bi-sensor. Large response field proves to originate from the intensive coupling between the radial stress field and the circumferential magnetic field during CJA process. The effect of outer-shell microstructure and complex SMD for 300 mA CJA-ed microwire is attributed to the fact that liquid nitrogen hinders the evolution of circumferential domain structure to some extent and protects the amorphous structure in the shell region. (C) 2014 AIP Publishing LLC.

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Correlation of Magnetic Domains, Microstructure and Gmi Effect of Joule-Annealed Melt-Extracted Co68.15fe4.35si12.25b13.75nb1cu0.5 Microwires for Double Functional Sensors

Valve Behavior Of Giant Magnetoimpedance In Field-Annealed Co70fe5si15nb2.2cu0.8b7 Amorphous Ribbon

Giant Magnetoimpedance Effect in a Co-Based Microwire for Quick-Response Magnetic Sensor Applications

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

Optimized Giant Magnetoimpedance Effect In Amorphous And Nanocrystalline Materials

Enhancing GMI properties of melt-extracted Co-based amorphous wires by twin-zone Joule annealing

Ultra-large Giant Magnetoimpedance Effect by a 2D Square Spiral Amorphous Microwire

Comparative Study on Magnetic Properties and Microstructure of As-prepared and Alternating Current Joule Annealed Wires

Large Enhancement of Gmi Effect in Polymer Composites Containing Co-Based Ferromagnetic Microwires

Enhanced Gmi Effect in A Co70fe5si15b10 Ribbon Due to Cu and Nb Substitution for B

Large GMI effect in Co-rich amorphous wire by tensile stress

Optimization of the High-Frequency Magnetoimpedance Response in Melt-Extracted Co-rich Microwires Through Novel Multiple-Step Joule Heating

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Optimization of GMI Properties by AC Joule Annealing in Melt‐extracted Co‐rich Amorphous Wires for Sensor Applications

Optimizing magnetoimpedance of amorphous microwires by nanocarbon-induced magnetic anisotropy

Improving Mechanical and Magnetocaloric Responses of Amorphous Melt-Extracted Gd-based Microwires Via Nanocrystallization

Temperature-stable magnetoimpedance (MI) of current-annealed Co-based amorphous microwires

Evolution of the Magnetic Anisotropy and Magnetostriction in Co-based Amorphous Alloys Microwires Due to Current Annealing and Stress -Sensory Applications

Tuning of magnetocaloric effect and optimization of scaling factor for Gd 55 Ni 10 Co 35 amorphous microwires

Improvement of giant magneto impedance of Co-rich melt extraction wires by stress-current annealing