Abstract:This paper presents a flexure-based displacement reduction mechanism driven by a voice coil motor to improve the motion resolution and eliminate the hysteresis nonlinearity of the traditional piezo-actuated micropositioning/nanopositioning stages. The mechanism is composed of three groups of compound bridge-type displacement reduction mechanisms, which adopt distributed-compliance rectangular beams to reduce the concentration of stress and improve the dynamic performance of the mechanism. The symmetrical distribution of the structure can eliminate the parasitic displacement of the mechanism and avoid the bending moment and lateral stress applied to the voice coil motor. Firstly, the analytical model of the mechanism is obtained by the stiffness matrix method. The theoretical displacement reduction ratio, input stiffness, and natural frequency of the displacement reduction mechanism are obtained by solving the analytical model. Then, through the static analysis and modal analysis of the mechanism with the Ansys software, the accuracy of the analytical model is verified, and the experimental prototype is also constructed for performance tests. The results show that the maximum stroke of the mechanism is 197.43 μm with motion resolution of 40 nm. The natural frequency is 291 Hz, and the input stiffness is 28.50 N/mm. Finally, the trajectory tracking experiment is carried out to verify the positioning performance of the mechanism. The experimental results show that the designed feedback controller has good stability, and the introduction of the feedforward controller and disturbance observer can greatly reduce the tracking errors.

A Novel Full-Digital Voice Coil Motor Drive for Wafer Stage

Design and analysis on voice coil motors drive system

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Modeling, Identification, and Adaptive Robust Motion Control of Voice-Coil Motor Driven Stages

Optimum design of voice coil motor using for nano-stage in lithographic equipment

Modeling and Analysis of A Novel Rectangular Voice Coil Motor for the 6-Dof Fine Stage of Lithographic Equipment

A Current-Control Mode Three-Level Pwm Switching Power Amplifier for Active Magnetic Bearings

Modified SFB-PI Control in GaN-based High-Speed Motor Drive

Novel Virtual Winding Current Controller for Suppression of Linear Permanent Magnet Machine Electromagnetic Thrust Ripple

A Novel Driving Strategy for the APMSM Based on Half-Bridge Topology With Midpoint Voltage Balancing

A New Phase Current Reconstruction Scheme For Four-Phase Srm Drives Using Improved Converter Topology Without Voltage Penalty

Novel Control System for Ultrasonic Motor Based on Low-Pass Filter

A Vibration Mitigation Approach for Inverter-fed Permanent Magnet Motor Drive System

A Pwm Based Switching Power Amplifier for Active Magnetic Bearings

Design, Modeling, Testing, and Control of a Novel Fully Flexure-Based Displacement Reduction Mechanism Driven by Voice Coil Motor

All digital space vector PWM induction motor drive based on flux control

A Novel Direct-Drive Rotary-Linear Machine and Ripple Reduction by Harmonic Current Injection Approach

Fully Digital Implementation Of Pmsm Servo Based On A Novel Current Control Strategy

Four-Module Three-Phase PMSM Drive for Suppressing Vibration and Common-Mode Current

Decoupled Discrete Current Control for AC Drives at Low Sampling-to-Fundamental Frequency Ratios