Abstract:Nickel‐rich LiNi1−x−yCoxMnyO2 (NCM, 1−x−y ≥ 0.6) is known as a promising cathode material for lithium‐ion batteries since its superiority of high voltage and large capacity. However, polycrystalline Ni‐rich NCMs suffer from poor cycle stability, limiting its further application. Herein, single crystal and polycrystalline LiNi0.84Co0.07Mn0.09O2 cathode materials are compared to figure out the relation of the morphology and the electrochemical storage performance. According to the Li+ diffusion coefficient, the lower capacity of single crystal samples is mainly ascribed to the limited Li+ diffusion in the large bulk. In situ XRD illustrates that the polycrystalline and single crystal NCMs show a virtually identical manner and magnitude in lattice contraction and expansion during cycling. Also, the electrochemically active surface area (ECSA) measurement is employed in lithium‐ion battery study for the first time, and these two cathodes show huge discrepancy in the ECSA after the initial cycle. These results suggest that the single crystal sample exhibits reduced cracking, surface side reaction, and Ni/Li mixing but suffers the lower Li+ diffusion kinetics. This work offers a view of how the morphology of Ni‐rich NCM effects the electrochemical performance, which is instructive for developing a promising strategy to achieve good rate performance and excellent cycling stability. A comprehensive investigation is conducted to figure out the inherent nature of the polycrystalline and single crystal Ni‐rich NCMs in course of their electrochemical behavior and battery failure mechanisms. The result shows that the intimately agglomerated primary particles render polycrystalline sample a larger electrochemically active surface area but a significantly increased cracking and surface side reaction.

Boosting the cycling and storage performance of lithium nickel manganese cobalt oxide-based high-rate batteries through cathode manipulation

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Polycrystalline secondary particle size regulation boosts the cycle performance of ultra-high-nickel layered oxide cathode materials

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Dual-modified surface encapsulation strategy for elevating rate performance and cycling stability of Ni-rich NCM811 cathode

Enabling the Strengthened Structural and Interfacial Stability of High‐Nickel LiNi0.9Co0.05Mn0.05O2 Cathode by a Coating‐Doping‐Microstructure Regulation Three‐In‐One Strategy

Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating

Crack-free Single-Crystalline Ni-rich Layered NCM Cathode Enable Superior Cycling Performance of Lithium-Ion Batteries

Enhanced Cyclability of LiNi0.6Co0.2Mn0.2O2 Cathodes by Integrating a Spinel Interphase in the Grain Boundary.

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Stabilizing Surface Chemistry and Texture of Single-Crystal Ni-rich Cathodes for Li-ion Batteries

Improving the Performance of LiNi0.925Co0.065Mn0.01O2 via Ti4+& Nb5+ Co-Modifications

A Comparative Investigation of Single Crystal and Polycrystalline Ni‐Rich NCMs as Cathodes for Lithium‐Ion Batteries

Elevating Cycle Stability and Reaction Kinetics in Ni‐Rich Cathodes Through Tailored Bulk and Interface Chemistry for Sulfide‐Based All‐Solid‐State Lithium Batteries

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Elevating cycle stability of Ni-rich NCM811 cathode via single-crystallization integrating dual-modification strategy for lithium-ion batteries

A short process and low-cost preparation of single crystal LiNi0.6Co0.2Mn0.2O2 cathode for lithium-ion batteries

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries