Abstract:Microalloying has long been recognized as an effective method for improving the mechanical properties of metallic materials and developing new ones. In this study, we comprehensively investigate the effects of Sc addition on the microstructural evolution and mechanical performance of nickel-based superalloys using a combination approach of the experiment, first-principles calculation, and multiscale modeling. The results show that Sc addition simultaneously improves the yield strength increasing from 1068 MPa to 1172 MPa (9.7%) and elongation increasing from 13.4% to 19.7% (47%). The microstructural characterizations reveal that Sc addition refines the grain size, increases the volume fraction of primary precipitate, induces the coarsening of secondary precipitates, and produces a new type of Sc-rich particle. First-principles calculations from the atom probe tomography experiment show that the anti-phase boundary energy of secondary precipitate is significantly increased in Sc-containing superalloys. A modified alloying-dependent yield strength model is developed by considering the multimodal precipitate size distribution and microstructure evolution obtained from experiments and atomic simulations. The increased yield strength originates from not only the Sc addition induced increased volume fraction of primary precipitate at grain boundary to enhance grain boundary strengthening, but also Sc addition induced increased anti-phase boundary energy of secondary precipitate to improve the precipitate strengthening. The increased elongation depends on the fact that the Sc element has a good affinity to deleterious elements and forms Sc-rich particle and oxygen-rich precipitate to enhance grain boundary strength. This work integrating multiscale modeling and experiment can be denoted as a universal framework to study the influence of alloy element on the microstructure and properties, which gives guiding significance to screen and design high-performance superalloys.

Principles for Creating Aluminum-Based Alloys Sparingly Alloyed with Scandium

Alloying of Industrial Aluminum Alloys with Scandium

Effects of Sc on the Vacancy and Solute Behaviours in Aluminium

Effect of a Small Addition of Scandium on the Phase Composition and Properties of Wrought Al–Cu–Er–Mg–Mn–Zr Alloy

Effect of Scandium on Grain refinement mechanism and Mechanical Properties of Al-7Si-0.6Mg alloy at Different Cooling Rates

New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications

Substitution potential of La/Ce/Er for high-cost Sc in rare-earth Al alloys: A comprehensive first-principles study

Effects of scandium addition on microstructure, mechanical and thermal properties of cast Be-Al alloy

Effect of Sc on Al3Fe phase and mechanical properties of as-cast AA5052 aluminum alloy

Nanostructure Characteristics of Al3Sc1-xZrx Nanoparticles and Their Effects on Mechanical Property and SCC Behavior of Al-Zn-Mg Alloys

Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy

Microstructures evolution and mechanical properties disparity in 2070 Al-Li alloy with minor Sc addition

Morphology evolution and growth mechanism of primary Al3Sc and eutectic Al3Sc in Al-Sc alloys

Effect of scandium on microstructure and mechanical properties of high zinc concentration aluminum alloys

Processing of Al-Sc aluminum alloy using SLM technology

Metallothermic Al-Sc Co-Reduction by Vacuum Induction Melting Using Ca

Influence of the interaction between Si and Sc on the microstructure and tensile properties of as casted Al-Si-Sc alloys

Mechanical properties, corrosion behavior and microstructure evolution of zinc and scandium co-strengthened 5xxx alloy

Influence of scandium addition on microstructure and mechanical properties in nickel-based superalloys: An integrated multiscale modeling and experimental approach

Calcium-Containing Aluminum Alloys

Enhancing the strength of Sc-containing Al-Cu-Li alloys by modifying the precipitation behavior through plastic deformation and heat treatment