Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Plasma-assisted nitriding of M2 tool steel: An experimental and theoretical approach

Microstructure and Properties of Plasma Nitrided 00cr12ni9mo4cu2ti Maraging Stainless Steel

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Insights into plasma nitriding behaviour of M50NiL steel with different initial microstructures

Nanosized precipitates in H13 tool steel low temperature plasma nitriding

Effect of Plasma Nitriding Pretreatment on the Mechanical Properties of AlCrSiN-Coated Tool Steels

Diamond-Like Carbon Coatings on Plasma Nitrided M2 Steel: effect of deposition parameters on adhesion properties

Effect of ion nitriding by glow discharge on the physical and mechanical properties of the plastically deformed tool steel R6M5

Surface Analysis of AISI D2 Steel Treated by Plasma Nitriding and Niobium and Vanadium Nitride Films by Cathodic Cage Plasma Deposition

A Study on Formation and Growth Mechanism of Nitride Layers During Plasma Nitriding Process of Plastic Injection Mold Steel

Study on Nitriding and Multi-Arc Ion Plating on M2 and H13 Steel

Microstructure and mechanical properties of surface layer of M50NiL steel plasma nitrided

Kinetics and wear behaviour of M50NiL steel plasma nitrided at low temperature

Investigation of the Surface Properties and Wear Properties of AISI H11 Steel Treated by Auxiliary Heating Plasma Nitriding

Tribological Studies of Plasma Source Ion Nitrided Low Alloy Tool Steel

Construcción de un reactor de nitruración por plasma y simulación de la distribución de temperaturas

Surface modification of high-speed steel (HSS) drills by plasma nitriding and cathodic cage tin deposition

Kinetics analysis and enhancement mechanism of aluminum-enhanced plasma nitriding for 42CrMo steel

The effect of temperature during plasma nitriding on the properties of IN718 additively manufactured by laser beam powder bed fusion