Abstract:In this study, we investigated the composition, microstructure, and phase evolution of (390–430 °C for 1–30 h) 17-4PH stainless steel with a work-hardened layer in the low-temperature plasma nitriding process. Scanning electron microscopy, X-ray diffraction, and transmission electron microscopy were used for the analysis. The results suggested that crack-like structures appeared with the nitriding conditions of 410 °C for 5–30 h and 430 °C for 3–30 h. The activation energy was relatively low (32 kJ/mol) at the initial stage of nitriding due to the presence of a work-hardened layer, which increased with elevated nitriding temperature and prolonged time. The nitrided layer was mainly composed of γ′-Fe 4 N with lamellar and granular shapes, whose intensity increased with increasing nitriding temperature or time. In the case of a lower temperature (390 °C) and shorter time (1−3h) of plasma nitriding, the austenite in the work-hardened layer transformed to the S phase (expanded austenite), and α' N (expanded martensite) was formed. As the nitriding temperature or time further increased, the expansion of the α' N and S phase increased, eventually both the S phase and α′ N disappeared. The phase evolution occurred: S phase transfers to CrN in the work-hardened layer, while α′ N phase transfers to γ′-Fe 4 N or CrN, and γ′-Fe 4 N phase transfers to α + CrN in the substrate. Among these phases, α′ N was distributed next to γ′-Fe 4 N, the α phase was surrounded by γ′-Fe 4 N, and CrN was precipitated at the normal grain boundaries but not at the twin boundaries. This work can provide a theoretical basis for the investigation of the wear and corrosion properties of the nitrided material in their application domains.

Microstructure and Properties of Plasma Nitrided 00cr12ni9mo4cu2ti Maraging Stainless Steel

Effect of Ti Content and Ageing on Microstructure and Hardness of 00cr12ni9mo4cu Maraging Stainless Steel

Age-Hardening Behaviour and the Factors of 00Cr12Ni9Mo4Cu2 Maraging Stainless Steel and Its Factors

Effect of Mo Content on Microstructure and Properties of 00cr12ni9mo (x) Cu2Ti Maraging Stainless Steel

Microstructure and mechanical properties of surface layer of M50NiL steel plasma nitrided

Microstructural characterization of plasma nitrided austenitic stainless steel

Influences of Partial Substitution of C by N on the Microstructure and Mechanical Properties of 9cr18mo Martensitic Stainless Steel

Use of plasma nitriding to improve the wear and corrosion resistance of 18Ni-300 maraging steel manufactured by selective laser melting

Structure and corrosion behavior of ultra-thick nitrided layer produced by plasma nitriding of austenitic stainless steel

Nitriding layer characteristics of modified AISI422 martensitic stainless steel in tempered state

Microstructure and Corrosion Resistance of Nitrogen-Rich Surface Layers on AISI 304 Stainless Steel by Rapid Nitriding in a Hollow Cathode Discharge

Research on Microstructure and Corrosion Resistance Properties of AISI 304 Austenitic Stainless Steel Produced by High Temperature Fast Nitriding

Microstructures and Mechanical Performance of Plasma-Nitrided Al0.3crfe1.5mnni0.5 High-Entropy Alloys

Composition, microstructure, and phase evolution of 17-4PH stainless steel with a work-hardened layer in the low-temperature plasma nitriding process

Effects of Initial Microstructure on the Low-Temperature Plasma Nitriding of Ferritic Stainless Steel

Plasma nitrided 65Mn steel: Microstructure, tribocorrosion and electrochemical properties and DFT calculation

Insights into plasma nitriding behaviour of M50NiL steel with different initial microstructures

Effect of Alloying Elements and Low Temperature Plasma Nitriding on Corrosion Resistance of Stainless Steel

Properties of Stainless-Steel Surface after Hollow Cathode Assisted Plasma Nitriding