Abstract:Plasma nitriding is widely used in various industrial applications to improve surface hardness and wear properties. Especially for tool steels, it is also used to improve the support and adhesion of diamond-like carbon (DLC) coatings. The properties of the nitrided zone produced by plasma nitriding are influenced by the applied process parameter, in particular temperature and time. However, for high-alloy tool steels, a deeper understanding of the underlying diffusion processes of the nitrogen and the interaction with the existing microstructure, as well as the effects on the case depth is still lacking. Therefore, in this study, specimens of high-alloy tool steel X153CrMoV12 were plasma nitrided at varying temperatures (480 °C, 520 °C, 560 °C) and treatment times (2 h, 4 h, 16 h). The resulting nitrided zones were investigated by optical and scanning electron microscopy (OM and SEM), depth-dependent glow discharge optical emission spectroscopy (GDOES), X-ray diffraction (XRD), and hardness measurements to characterize their microstructure, chemical composition, and hardness depending on the process parameters. The distribution of carbides (M7C3), e.g., chromium carbides, affects the diffusion of the nitrogen and the layer growth. An increase of temperature and duration leads to an increased layer thickness. The composition of the compound layer is, e.g., influenced by the process parameters: ε nitrides (Fe2–3N) occurred preferentially at lower temperatures, while γ′ nitrides (Fe4N) appeared mostly at higher temperatures. In order to investigate the influence of the carbides of the high-alloy tool steel on the nitriding process, a new methodology was developed by means of finite element analysis (FE), which makes it possible to analyze this influence on the development of the nitrogen concentration profile. This methodology makes it possible for the first time to map the heterogeneous nitrogen evolution and distribution.

Microstructural characterization of plasma nitrided austenitic stainless steel

Microstructure and Properties of Plasma Nitrided 00cr12ni9mo4cu2ti Maraging Stainless Steel

Structure and corrosion behavior of ultra-thick nitrided layer produced by plasma nitriding of austenitic stainless steel

Nitriding layer characteristics of modified AISI422 martensitic stainless steel in tempered state

Microstructure and mechanical properties of surface layer of M50NiL steel plasma nitrided

Microstructure and Corrosion Resistance of Nitrogen-Rich Surface Layers on AISI 304 Stainless Steel by Rapid Nitriding in a Hollow Cathode Discharge

Micro-/Meso-Structure Control of Multi-Hostmetal Alloys by Massive Nitrogen Supersaturation

Characteristics of the Nitrided Layer Formed on AISI 304 Austenitic Stainless Steel by High Temperature Nitriding Assisted Hollow Cathode Discharge

Evolution of Microstructure and Hardness of the Nitrided Zone during Plasma Nitriding of High-Alloy Tool Steel

Effects of Initial Microstructure on the Low-Temperature Plasma Nitriding of Ferritic Stainless Steel

Effect of Gas Content and Treatment Temperature on the Characteristic of Surface Layers of Low Temperature Plasma Nitrided 316L Austenitic Stainless Steel

Properties of Stainless-Steel Surface after Hollow Cathode Assisted Plasma Nitriding

Microstructures and Tribological Behaviour of Oxynitrided Austenitic Stainless Steel

Plasma Nitridation and Mechanical Properties of Pure Titanium Casts

High-Density Stacking Faults in A Supersaturated Nitrided Layer on Austenitic Stainless Steel

Composition, microstructure, and phase evolution of 17-4PH stainless steel with a work-hardened layer in the low-temperature plasma nitriding process

Low-Temperature Plasma Nitriding for Austenitic Stainless Steel Layers with Various Nickel Contents Fabricated via Direct Laser Metal Deposition

Insights into plasma nitriding behaviour of M50NiL steel with different initial microstructures

Research on Microstructure and Corrosion Resistance Properties of AISI 304 Austenitic Stainless Steel Produced by High Temperature Fast Nitriding