Abstract:The paper aims to simulate the micromechanical behavior of asphalt mixtures during the compaction process using the Discrete Element Method (DEM). The interactions between the components of a Porous Asphalt (PA) mixture were represented using an Elastic Viscoelastic Contact Model (EVCM), which is a user-defined model implemented in EDEM software, developed based on linear elastic and Burger's viscoelastic constitutive equations. The macroscale parameters of asphalt mortar were characterized using the nonlinear regression analysis of master curves obtained from Dynamic Shear Rheometer (DSR) tests. The verification process of EVCM successfully indicated that the computations trends fall within the range of expected values for the typical asphalt mixture material. Further, a Superpave Gyratory Compaction (SGC) test was carried out and the obtained sample was scanned using X-ray Computed Tomography (X-ray CT) to capture the air void distributions. The DEM was utilized where digital samples were established to simulate the overall process of laboratory and field compaction. The simulation results showed that the model provided a comparable prediction of responses and demonstrated the capability of SGC to fabricate a representative sample. The influence of temperature on the asphalt compaction process was explored and the results implied that temperature decreasing adversely affects the compactability and dramatically increases the demanded compaction efforts which are consistent with the law of viscoelasticity. On the contrary, when the temperature is high, the asphalt binder becomes too fluid and roller loads will simply displace, or "shove" the mat rather than compact it. Tracking the change in the air voids proportion indicates that the motion of aggregates is rather compound. The aggregates flowed vertically downwards in line with the compacting orientation while moved horizontally outwards away from the center. The results demonstrated that the model effectively simulated the compaction process, the developed model, and can be considered as a useful tool. All in all, the findings confirm that the concept is technically practicable, affording the model a tremendous potential to help researchers understand the microstructural phases of asphalt mixture during the compaction.

Macroscopic effects of intraparticle fracture, grain topology and shape on vehicle dynamics and mobility over gravel road beds

Deformation Characteristics of Inherently Anisotropic Granular Media under Repeated Traffic Loading: a DEM Study

Bridging The Micro And Macro For Granular Media: A Computational Multi-Scale Paradigm

Simulating grain shape effects and damage in granular media using PeriDEM

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Numerical analysis on tractive performance of off-road tire on gravel road using a calibrated finite element method–discrete element method model and experimental validation

Peridynamics-based discrete element method (PeriDEM) model of granular systems involving breakage of arbitrarily shaped particles

Effective Elastic Properties and Micro-mechanical Damage Evolution of Composite Granular Rocks: Insights from Particulate Discrete Element Modelling

Analysis of granular mechanical parameters characteristics in graded gravel triaxial test

Deformation and Frictional Failure of Granular Media in 3D Analog and Numerical Experiments

Micromechanical simulation of porous asphalt mixture compaction using discrete element method (DEM)

A grain texture model to investigate effects of grain shape and orientation on macro-mechanical behavior of crystalline rock

Effects of curvature-related DEM contact model on the macro- and micro-mechanical behaviours of granular soils

Effects of morphological gene decay and mutation on the micro-macro mechanical behaviors of granular soils

Field Test and Numerical Modeling of Vehicle Impact on a Boulder with Impact-Induced Fractures

Hydro-mechanical analysis of particle migration in fractures with CFD-DEM

The role of randomly packed particles on macroscopic elastic bonded grain properties

Macro-and-micromechanical responses of ballast under triaxial shearing using coupled DEM–FDM with flexible and rigid membranes: a comparative study

The Effects of Rolling Resistance and Non-Convex Particle on the Mechanics of the Undrained Granular Assembles in 2D