Abstract:The uncertainty in local structure and time-variable compaction of ballast aggregates poses challenges in selecting suitable stabilization methods and parameters for ballast tracks in practical engineering, often resulting in suboptimal operational outcomes. To address this issue comprehensively, the spatial hybrid model of the double dynamic stabilisers-ballast track (MBD-DEM) is proposed in this paper. Subsequent numerical simulations of stabilisation operations are conducted to elucidate ballast vibration, migration behavior and the evolution of ballast track resistance under varying initial conditions of the ballast bed. Initially, leveraging multibody dynamics theory (MBD) and discrete element method (DEM), a MBD model of double stabilisers and a DEM ballast track model containing 6 sleepers were established respectively. Using the coupling interface, the real-time hybrid calculation of these two models is achieved through 6 sleepers in the middle of the ballast bed. Subsequently, the model's accuracy was validated by comparing test data from stabilisation vehicle operations on a Kunming Railway Bureau test line with simulation data from the dynamic double stabilisers-ballast track spatial hybrid model. Finally, utilizing the proposed hybrid model, the dynamic behavior, contact states, and movement rules of ballast particles during stabilisation operations on both loose and initially stable ballast beds (LBB and ISBB) were investigated at the mesoscopic scale. Concurrently, an in-depth analysis of lateral resistance changes in the ballast bed before and after the stabilisation operation is presented. The relevant findings effectively unveil the evolution of dynamic behavior in the ballast bed during stabilisation operations, concluding with practical suggestions for on-site operations. Simulation results illustrate that the rotation of ballast particles in the XY plane beneath each sleeper is predominantly characterized by harmonic rotation. With an increase in the depth of the ballast bed, the range of the rotation axis for combined angular velocity diminishes, leading to the phenomenon of rotation axis deflection. To ensure operational safety and efficiency, a minimum of two-times stabilization operations is recommended for loose ballast beds (LBB), with three-times operations considered optimal. For initially stable ballast beds (ISBB), one-time stabilization operation is basically sufficient.

Macro-and-micromechanical responses of ballast under triaxial shearing using coupled DEM–FDM with flexible and rigid membranes: a comparative study

Cyclic and Postcyclic Triaxial Testing of Ballast and Subballast

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

Performance of Ballast Influenced by Deformation and Degradation: Laboratory Testing and Numerical Modeling

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Coupled discrete-continuum approach for railway ballast track and subgrade macro-meso analysis

The discrete and continuum behaviour of railway ballast

Macro-meso dynamic analysis of railway transition zone: Hybrid DEM/FDM simulation and experimental validation

Breakage Characteristics of Ballast Particle in Uniaxial Compression Tests Incorporating Shape and Size Effects

Evaluation of Ballast Behavior under Different Tie Support Conditions using Discrete Element Modeling

Dynamic Responses and Associated Permanent Deformation of Ballasted Trackbed Due to Train Passages at High Speed

Stress-dilatancy behaviour of fouled ballast: experiments and DEM modelling

Effects of Particle Size and Grading on the Breakage of Railway Ballast: Laboratory Testing and Numerical Modeling

Discrete Element Analysis of Shape Effect on the Shear Behaviors of Ballast

DEM meso-damage analysis for double-block ballastless track with non-coincident interlayer contact

Triaxial numerical simulation study on the mechanical properties of rockfill materials under different boundary conditions

Direct Shear Properties of Railway Ballast Mixed with Tire Derived Aggregates: Experimental and Numerical Investigations

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

A new DEM model to simulate the abrasion behavior of irregularly-shaped coarse granular aggregates

Hybrid Lattice-discrete element method for ballast modeling

Static and cyclic compressive mechanical characterization of polyurethane-reinforced ballast in a railway