Abstract:As a core infrastructure of high-speed railways, ballast layers constituted by graded crushed stones feature noteworthy particle movement compared with normal railways, which may cause excessive settlement and have detrimental effects on train operation. However, the movement behavior remains ambiguous due to a lack of effective measurement approaches and analytical methods. In this study, an image-aided technique was developed in a full-scale model test using digital cameras and a color-based identification approach. Nearly 1274 surface ballast particles were manually dyed by discernible colors to serve as tracers in the test. The movements of the surface ballast particles were tracked using the varied pixels displaying tracers in the photos that were intermittently taken during the test in the perpendicular direction. The movement behavior of ballast particles under different combinations of train speeds and axle loads was quantitatively evaluated. The obtained results indicated that the surface ballast particle movements were slight, mainly concentrated near sleepers under low-speed train loads and greatly amplified and extended to the whole surface when the train speed reached 360 km·h-1. Additionally, the development of ballast particle displacement statistically resembled its rotation. Track vibration contributed to the movements of ballast particles, which specifically were driven by vertical acceleration near the track center and horizontal acceleration at the track edge. Furthermore, the development trends of ballast particle movements and track settlement under long-term train loading were similar, and both stabilized at nearly the same time. The track performance, including the vibration characteristics, accumulated settlement and sleeper support stiffness, was determined to be closely related to the direction and distribution of ballast particle flow, which partly deteriorated under high-speed train loads.

Micromechanical Particle Interactions in Railway Ballast Through DEM Simulations of Direct Shear Tests

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

“Critical Particle Size” and Ballast Gradation Studied by Discrete Element Modeling

3D Discrete Element Modeling of Aggregate Homogeneity Influence on Bituminous Mix Shear Strength

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Micromechanics-Based Analysis of the Effect of Aggregate Homogeneity on the Uniaxial Penetration Test of Asphalt Mixtures

Direct Shear Properties of Railway Ballast Mixed with Tire Derived Aggregates: Experimental and Numerical Investigations

Evaluation of Ballast Behavior under Different Tie Support Conditions using Discrete Element Modeling

Macro-and-micromechanical responses of ballast under triaxial shearing using coupled DEM–FDM with flexible and rigid membranes: a comparative study

Comparison of Laboratory Testing Using SmartRock and Discrete Element Modeling of Ballast Particle Movement

Discrete Element Analysis of Shape Effect on the Shear Behaviors of Ballast

Quantification of Railway Ballast Degradation by Abrasion Testing and Computer-Aided Morphology Analysis

Image-Aided Analysis of Ballast Particle Movement along a High-Speed Railway

Effects of Particle Size and Grading on the Breakage of Railway Ballast: Laboratory Testing and Numerical Modeling

The discrete and continuum behaviour of railway ballast

Discrete Element Modeling of Full-Scale Ballasted Track Dynamic Responses from an Innovative High-Speed Rail Testing Facility

Dynamic Responses and Associated Permanent Deformation of Ballasted Trackbed Due to Train Passages at High Speed

Dynamic Behavior Modeling of Full-Scale High-Speed Ballasted Track Using Discrete Element Method

A new DEM model to simulate the abrasion behavior of irregularly-shaped coarse granular aggregates

Coupled discrete-continuum approach for railway ballast track and subgrade macro-meso analysis

Research on the mechanism of railway ballast shear performance under various sand contents and load conditions